; docformat = 'rst'
;
; NAME:
;   cgPS_CONFIG
;
; PURPOSE:
;    The purpose of this program is to allow the user to configure the PostScript device
;    with a graphical interface.
;******************************************************************************************;
;                                                                                          ;
;  Copyright (c) 2000-2012, by Fanning Software Consulting, Inc. All rights reserved.      ;
;                                                                                          ;
;  Redistribution and use in source and binary forms, with or without                      ;
;  modification, are permitted provided that the following conditions are met:             ;
;                                                                                          ;
;      * Redistributions of source code must retain the above copyright                    ;
;        notice, this list of conditions and the following disclaimer.                     ;
;      * Redistributions in binary form must reproduce the above copyright                 ;
;        notice, this list of conditions and the following disclaimer in the               ;
;        documentation and/or other materials provided with the distribution.              ;
;      * Neither the name of Fanning Software Consulting, Inc. nor the names of its        ;
;        contributors may be used to endorse or promote products derived from this         ;
;        software without specific prior written permission.                               ;
;                                                                                          ;
;  THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY        ;
;  EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES    ;
;  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT     ;
;  SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT,             ;
;  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED    ;
;  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;         ;
;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND             ;
;  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT              ;
;  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS           ;
;  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                            ;
;******************************************************************************************;
;
;+
; The purpose of this program is to allow the user to configure the PostScript device
; with or without a graphical user interface. This function is essentially a simplified
; wrapper to the FSC_PSConfig object, which provides a powerful graphical user interface
; for configuring the IDL PostScript device.
;
; .. image:: psconfig.png
; 
; :Categories:
;    Utilities, Graphics
;    
; :Returns:
;    A structure of keywords, appropriate for configuring the PostScript device, is returned.
;    These keywords are generally passed to the PostScript device by means of keyword inheritance::
;    
;         keywords = cgPS_Config()   ; Obtain PostScript keywords
;         Set_Plot, 'PS'          ; Select the PostScript device
;         Device, _Extra=keywords ; Configure the PostScript device with keywords
;    
; :Params:
;     psobject: in, optional, type=object
;        An FSC_PSCONFIG object reference of the sort returned by this function
;        can be passed as an argument to the function. It is up to the user to destroy 
;        the object if passed as an argument. Passing an object argument essentially
;        by-passes the rest of the keywords and the GUI will take its initial values
;        from the values in the input object. This allows the programmer to keep track
;        of how the user last configured the GUI and to set it up in exactly the same
;        way the next time the GUI is invoked.
;
; :Keywords:
;     AvantGarde: in, optional, type=boolean, default=0
;        Set this keyword to select the AvantGarde PostScript font.
;     Bits_per_Pixel: in, optional, type=integer, default=8
;        The number of image bits saved for each image pixel: 2, 4, or 8. 
;     Bold: in, optional, type=boolean, default=0
;        Set this keyword to select a bold PostScript font.
;     BookStyle: in, optional, type=boolean, default=0
;        Set this keyword to specify that the book version of the current PostScript
;        font should be used.
;     Bkman: in, optional, type=boolean, default=0
;        Set this keyword to select the Bookman PostScript font.
;     Cancel: out, optional, type=boolean, default=0
;        If this keyword is set to 1, the user hit the Cancel button in the GUI.
;     CMYK: in, optional, type=boolean, default=0
;        Set this keyword to use CMYK colors instead of RGB colors in the output.
;     Color: in, optional, type=boolean, default=1
;        Set this keyword to 1 to select color or gray-scale output.
;     Courier: in, optional, type=boolean, default=0
;        Set this keyword to select the Courier font.
;     Debug: in, optional, type=boolean, default=0
;        Set this keyword to get traceback information when errors are encountered.
;     Decomposed: in, optional, type=boolean, default=0
;        Set this keyword to turn on 24-bit color support. Set to zero to select indexed color 
;        support. Applies only to IDL versions 7.1 and higher.
;     DefaultSetup: in, optional, type=structure
;        Set this keyword to the "name" of a default style. Current styles (you can easily
;        create and add your own to the source code) are the following::
;           "System (Portrait)" - The normal "default" system set-up. Also, "System".
;           "System (Landcape)" - The normal "default" landscape system set-up.
;           "Centered (Portrait)" - The window centered on the page. Also, "Center" or "Centered".
;           "Centered (Landscape)" - The window centered on the landscape page. Also, "Landscape".
;           "Square (Portrait)" - A square plot, centered on the page.
;           "Square (Landscape)" - A square plot, centered on the landscape page.
;           "Figure (Small)" - A small encapsulated figure size, centered on page. Also, "Encapsulated" or "Encapsulate".
;           "Figure (Large)" - A larger encapsulated figure size, centered on page. Also, "Figure".
;           "Color (Portrait)" - A "centered" plot, with color turned on. Also, "Color".
;           "Color (Landscape)" - A "centered" landscape plot, with color turned on.
;     Demi: in, optional, type=boolean, default=0
;        Set this keyword to select the Demi font style.
;     Directory: in, optional, type=string
;        Set this keyword to the name of the starting directory. The current directory is used by default.
;     Encapsulated: in, optional, type=boolean, default=0
;        Set this keyword to 1 to select Encapsulated PostScript output.
;     European: in, optional
;        This keyword is depreciated in favor or `Metric`.
;     Filename: in, optional, type=string, default='idl.ps'
;        Set this keyword to the name of the PostScript file you wish to create.
;     FontInfo: in, optional, type=boolean, default=0
;        Set this keyword if you wish to see font information in the GUI interface. Since font
;        information has to be interpreted to be used, most users prefer not to see this information
;        on the GUI.
;     FontSize: in, optional, type=integer, default=12
;        Set this keyword to the desired font size. Values should be between 6 and 32.
;     FontType: out, optional, type=integer
;        This keyword is both an input and an output keyword. It allows you to specify the font
;        type you wish to use, and it also returns the font type the user selected in the GUI.
;        The user is responsibe for configuring the PostScript graphical commands with the appropriate font
;        type, because it cannot be done via the normal Device keyword channel. Normally, this is set to
;        !P.Font.
;     Group_Leader: in, optional, type=long
;        Set this keyword to the identifer of a widget group leader. This program will be destroyed
;        if the group leader application is destroyed.
;     Helvetica: in, optional, type=boolean, default=0
;        Set this keyword to select the Helvetica PostScript font.
;     Inches: in, optional, type=boolean, default=1
;        Set this keyword to indicate sizes and offsets are in inches as opposed to centimeters. 
;        Set to zero by default if the `Metric` keyword is set.
;     Italic: in, optional, type=boolean, default=0
;        Set this keyword to select italic type font styling.
;     Isolatin: in, optional, type=boolean, default=0
;        Set this keyword to select ISOlatin1 encoding.
;     Landscape: in, optional, type=boolean, default=0
;        Set this keyword to select Landscape page output. Portrait page output is the default.
;     Language_Level: in, optional, type=integer, default=1
;        Set the language level of the PostScript output. Language level 2 required for features
;        such as filled patterns for polygons.
;     Light: in, optional, type=boolean, default=0
;        Set this keyword to select the Light PostScript style for the font.
;     Match: in, optional, type=boolean, default=0
;        If this keyword is set, the initial PostScript window will match the aspect ratio of the 
;        current graphics window.
;     Medium: in, optional, type=boolean, default=0
;        Set this keyword to select the Medium PostScript style for the font.
;     Metric: in, optional, type=boolean, default=0
;        Set this keyword to indicate metric mode (i.e., A4 page and centimeter units). 
;     Name: in, optional, type=string
;        Set this keyword to the "name" of the created FSC_PSConfig object.
;     Narrow: in, optional, type=boolean, default=0
;        Set this keyword to select the Narrow font style.
;     NoGUI: in, optional, type=boolean, default=0
;        Set this keyword if you don't want a graphical user interface, but just want to get the 
;        return structure of keywords.
;     Oblique: in, optional, type=boolean, default=0
;        Set this keyword to select the Oblique font style.
;     PageType: in, optional, type=string, default='LETTER'
;        Set this keyword to the "type" of page. Possible values are::
;          "Letter" - 8.5 by 11 inches. (Default, unless the Metric keyword is set.)
;          "Legal" - 8.5 by 14 inches.
;          "Ledger" - 11 by 17 inches.
;          "A4" - 21.0 by 29.7 centimeters. (Default, if the Metric keyword is set.)
;     Palatino: in, optional, type=boolean, default=0
;        Set this keyword to select the Palatino font.
;     Preview: in, optional, type=integer, default=0
;        Set this keyword to select the type of PostScript preview to add to the file. Values 0, 1, or 2.
;        Adding previews to PostScript files created in IDL is not recommended as the results are always
;        poor. There are better methods to add PostScript previews using other software, such as GhostView.
;     Schoolbook: in, optional, type=boolean, default=0
;        Set this keyword to select the Schoolbook PostScript font.
;     Set_Font: in, optional, type=string
;        Set this keyword to the name of a PostScript hardware or true-type font you want to use.
;        Note that if you specify a true-type font, you must also set the `TrueType` keyword.
;     Symbol: in, optional, type=boolean, default=0
;        Set this keyword to select the Symbol PostScript font.
;     Times: in, optional, type=boolean, default=0
;        Set this keyword to select the Times PostScript font.
;     TrueType: in, optional, type=boolean, default=0
;        The same functionality as TT_Font. This keyword is now depreciated.
;     TT_Font: in, optional, type=boolean, default=0
;        Set this keyword to use true-type fonts in the PostScript output. Set the name of the font
;        with the `Set_Font` keyword.
;     XOffset: in, optional, type=float 
;        Set this keyword to the X Offset. Uses "System (Portrait)" defaults. (Note: offset 
;        calculated from lower-left corner of page.)
;     XSize: in, optional, type=float
;        Set this keyword to the X size of the PostScript "window". Uses "System (Portrait)" defaults.
;     YOffset: in, optional, type=float 
;        Set this keyword to the Y Offset. Uses "System (Portrait)" defaults. (Note: offset 
;        calculated from lower-left corner of page.)
;     YSize: in, optional, type=float
;        Set this keyword to the Y size of the PostScript "window". Uses "System (Portrait)" defaults.
;     ZapfChancery: in, optional, type=boolean, default=0
;        Set this keyword to select the ZapfChancery PostScript font.
;     ZapfDingbats: in, optional, type=boolean, default=0
;        Set this keyword to select the ZapfDingbats PostScript font.
;
; :Examples:
;    To have the user specify PostScript configuration parameters, use
;    the program like this::
;
;       keywords = cgPS_Config(Cancel=cancelled)
;       IF cancelled THEN RETURN
;       thisDevice = !D.Name
;       Set_Plot, 'PS'
;       Device, _Extra=keywords
;       Plot, findgen(11) ; Or whatever graphics commands you use.
;       Device, /Close_File
;       Set_Plot, thisDevice
;
; :Author:
;     FANNING SOFTWARE CONSULTING::
;        David W. Fanning 
;        1645 Sheely Drive
;        Fort Collins, CO 80526 USA
;        Phone: 970-221-0438
;        E-mail: david@idlcoyote.com
;        Coyote's Guide to IDL Programming: http://www.idlcoyote.com
;
; :History:
;     Change History::
;        Written by David W. Fanning, 31 January 2000.
;        Added NOGUI keyword to allow default keywords to be obtained without
;        user interaction. 11 Oct 2004. DWF.
;        Added CMYK option 24 August 2007. Requires LANGUAGE_LEVEL=2 printer. L. Anderson
;        Updated for IDL 7.1 and 24-bt color PostScript support. 24 May 2009. DWF.
;        Added MATCH keyword. 14 Dec 2010. DWF.
;        Changed ENCAPSULATE keyword to ENCAPSULATED, which is what I always type! 29 Jan 2011. DWF.
;        Depreciated EUROPEAN keyword in favor of METRIC. 31 Jan 2011. DWF.
;        Renamed cgPS_Config from PSConfig. 5 November 2013. DWF.
;        Added Portrait, Language_Level, Font_Size, and TT_Font keywords to make it possible to pass
;           keywords directly from the FSC_PSConfig object (using the GetKeywords method). 11 Apr 2014. DWF.
;        
; :Copyright:
;     Copyright (c) 2000-2012, Fanning Software Consulting, Inc.
;-
FUNCTION cgPS_Config, psObject,       $ ; A FSC_PSCONFIG object. 
   AvantGarde=avantgarde,             $ ; Set this keyword to select the AvantGarde font.
   Bits_per_Pixel=bits_per_pixel,     $ ; The number of image bits saved for each image pixel: 2, 4, or 8.
   Bold=bold,                         $ ; Set this keyword to select the Bold font style.
   BookStyle=book,                    $ ; Set this keyword to select the Book font style.
   Bkman=bookman,                     $ ; Set this keyword to select the Bookman font.
   Cancel=cancelled,                  $ ; This output keyword will be set to 1 if the user CANCELs. Set to 0 otherwise.
   CMYK=cmyk,                         $ ; Set this keyword to use CMYK colors instead of RGB. (Requires LANGUAGE_LEVEL=2 printer.)
   Color=color,                       $ ; Set this keyword to select Color PostScript output.
   Courier=courier,                   $ ; Set this keyword to select the Courier font.
   Debug=debug,                       $ ; Set this keyword to get traceback information when errors are encountered.
   Decomposed=decomposed,             $ ; Set this keyword to select 24-bit color PostScript support. (IDL 7.1 and above.)
   DefaultSetup=defaultsetup,         $ ; Set this keyword to the "name" of a default style.
   Demi=demi,                         $ ; Set this keyword to select the Demi font style.
   Directory=directory,               $ ; Set thie keyword to the name of the starting directory. Current directory by default.
   Encapsulated=encapsulated,         $ ; Set this keyword to select Encapsulated PostScript output.
   European=european,                 $ ; This keyword depreciated in favor of "metric".
   Filename=filename,                 $ ; Set this keyword to the name of the file. Default: 'idl.ps'
   FontInfo=fontinfo,                 $ ; Set this keyword if you want font information in the FSC_PSCONFIG GUI.
   FontSize=fontsize,                 $ ; Same as FONT_SIZE. This keyword now depreciated.
   Font_Size=font_size,               $ ; Preferred way to set the font size. Between 6 and 36. Default is 12.            
   FontType=fonttype,                 $ ; An input/output keyword that will have the FontType. Will be !P.Font unless FontInfo is selected.
   Group_Leader=group_leader,         $ ; The group leader of the PSConfig modal widget.
   Helvetica=helvetica,               $ ; Set this keyword to select the Helvetica font.
   Inches=inches,                     $ ; Set this keyword to indicate sizes and offsets are in inches as opposed to centimeters.
   Italic=italic,                     $ ; Set this keyword to select the Italic font style.
   Isolatin=isolatin,                 $ ; Set this keyword to select ISOlatin1 encoding.
   Landscape=landscape,               $ ; Set this keyword to select Landscape output.
   Language_Level=language_level,     $ ; Set the language level.
   Light=light,                       $ ; Set this keyword to select the Light font style.
   Match=match,                       $ ; Set this keyword to match the aspect ratio of the current graphics window.
   Medium=medium,                     $ ; Set this keyword to select the Medium font style.
   Metric=metric,                     $ ; Set this keyword to indicate metric mode (i.e., A4 page and centimeter units).
   Name=name,                         $ ; The "name" of the object.
   Narrow=narrow,                     $ ; Set this keyword to select the Narrow font style.
   NoGUI=nogui,                       $ ; Return the default keywords directly, without user interaction.
   Oblique=oblique,                   $ ; Set this keyword to select the Oblique font style.
   PageType=pagetype,                 $ ; Set this keyword to the "type" of page: 'Letter', 'Legal', 'Ledger', or 'A4'.
   Palatino=palatino,                 $ ; Set this keyword to select the Palatino font.
   Portrait=portrait,                 $ ; Set this keyword as an alternative way of setting LANDSCAPE keyword to 0.
   Preview=preview,                   $ ; Set this keyword to select Preview mode: 0, 1, or 2.
   Schoolbook=schoolbook,             $ ; Set this keyword to select the Schoolbook font.
   Set_Font=set_font,                 $ ; Set this keyword to the name of a font passed to PostScript with Set_Plot keyword.
   Symbol=symbol,                     $ ; Set this keyword to select the Symbol font.
   Times=times,                       $ ; Set this keyword to select the Times font.
   TrueType=truetype,                 $ ; Same as TT_Font keyword. Now depreciated.
   TT_Font=tt_font,                   $ ; The preferred way to select True-Type fonts.
   XOffset=xoffset,                   $ ; Set this keyword to the XOffset. (Note: offset calculated from lower-left corner of page.)
   XSize=xsize,                       $ ; Set this keyword to the X size of the PostScript "window".
   YOffset=yoffset,                   $ ; Set this keyword to the YOffset. (Note: offset calculated from lower-left corner of page.)
   YSize=ysize,                       $ ; Set this keyword to the Y size of the PostScript "window".
   ZapfChancery=zapfchancery,         $ ; Set this keyword to select the ZapfChancery font.
   ZapfDingbats=zapfdingbats            ; Set this keyword to select the ZapfDingbats font.

    On_Error, 2
    
    ; Depreciated keywords.
    IF N_Elements(metric) EQ 0 THEN metric = Keyword_Set(european) ELSE metric = Keyword_Set(metric)
    CASE 1 OF
        (N_Elements(fontsize) EQ 0) && (N_Elements(font_size) EQ 0): font_size = 12
        (N_Elements(fontsize) NE 0) && (N_Elements(font_size) EQ 0): font_size = fontsize
        (N_Elements(fontsize) NE 0) && (N_Elements(font_size) NE 0): Undefine, fontsize
        ELSE:
    ENDCASE
    
    ; Cannot have landscape orientation with encapsulated PostScript output.
    IF Keyword_Set(encapsulated) THEN landscape = 0
    IF Keyword_Set(portrait) THEN landscape = 0
    
    ; Did the user ask us to match the aspect ratio of the current graphics window?
    IF Keyword_Set(match) THEN BEGIN
        
        ; Is this a device that supports windows?
        IF (!D.Flags AND 256) NE 0 THEN BEGIN
        
            ; Is there a current graphics window?
            IF !D.Window GE 0 THEN BEGIN
                IF N_Elements(inches) NE 0 THEN cm = 1 - Keyword_Set(inches)
                keywords = cgPSWindow(Landscape=landscape, CM=cm, Metric=metric, /Sane_Offsets)
                xsize = keywords.xsize
                ysize = keywords.ysize
                xoffset = keywords.xoffset
                yoffset = keywords.yoffset
                inches = keywords.inches
                landscape = keywords.landscape
                portrait = keywords.portrait
            ENDIF
        ENDIF
    ENDIF
    
    IF N_Elements(psObject) EQ 0 THEN BEGIN
       psObject = Obj_New('FSC_PSCONFIG', $
          AvantGarde=avantgarde,             $
          Bits_per_Pixel=bits_per_pixel,     $
          Bold=bold,                         $
          BookStyle=book,                    $
          Bkman=bookman,                     $
          CMYK=cmyk,                         $
          Color=color,                       $
          Courier=courier,                   $
          Debug=debug,                       $
          Decomposed=decomposed,             $
          DefaultSetup=defaultsetup,         $
          Demi=demi,                         $
          Directory=directory,               $
          Encapsulated=encapsulated,         $
          Filename=filename,                 $
          FontSize=font_size,                $
          FontType=fonttype,                 $
          Helvetica=helvetica,               $
          Inches=inches,                     $
          Italic=italic,                     $
          Isolatin=isolatin,                 $
          Landscape=landscape,               $
          Language_Level=language_level,     $
          Light=light,                       $
          Medium=medium,                     $
          Metric=metric,                     $
          Name=name,                         $
          Narrow=narrow,                     $
          Oblique=oblique,                   $
          PageType=pagetype,                 $
          Palatino=palatino,                 $
          Preview=preview,                   $
          Schoolbook=schoolbook,             $
          Set_Font=set_font,                 $
          Symbol=symbol,                     $
          Times=times,                       $
          TrueType=(Keyword_Set(truetype) || Keyword_Set(tt_font)),    $
          XOffset=xoffset,                   $
          XSize=xsize,                       $
          YOffset=yoffset,                   $
          YSize=ysize,                       $
          ZapfChancery=zapfchancery,         $
          ZapfDingbats=zapfdingbats )
       create = 1
    ENDIF ELSE BEGIN
       type = Size(psObject, /Type)
       IF type NE 11 THEN BEGIN
          Message, 'Object Reference required as an argument'
       ENDIF
       create = 0
    ENDELSE
    
       ; Call the GUI of the FSC_PSCONFIG object.
    
    IF Keyword_Set(nogui) EQ 0 THEN $
       psObject->GUI, Group_Leader=group_leader, Cancel=cancelled, FontInfo=Keyword_Set(fontinfo)
    
       ; Get the PostScript device keywords, along with the font type information.
    
    keywords = psObject->GetKeywords(FontType=fonttype)
    
       ; If this program created the psObject, destroy it. Otherwise leave it.
    
    IF create THEN Obj_Destroy, psObject
    
       ; Return the PostScript device keywords.
    
    RETURN, keywords
    
END ;----------------------------------------------------------------------