; docformat = 'rst' ; ; NAME: ; cgTaylorDiagram ; ; PURPOSE: ; The program implements a Taylor Diagram in IDL direct graphics (Coyote Graphics). ; http://onlinelibrary.wiley.com/doi/10.1029/2000JD900719/abstract ; ;******************************************************************************************; ; ; ; Copyright (c) 2013, by Fanning Software Consulting, Inc. All rights reserved. ; ; ; ; Redistribution and use in source and binary forms, with or without ; ; modification, are permitted provided that the following conditions are met: ; ; ; ; * Redistributions of source code must retain the above copyright ; ; notice, this list of conditions and the following disclaimer. ; ; * Redistributions in binary form must reproduce the above copyright ; ; notice, this list of conditions and the following disclaimer in the ; ; documentation and/or other materials provided with the distribution. ; ; * Neither the name of Fanning Software Consulting, Inc. nor the names of its ; ; contributors may be used to endorse or promote products derived from this ; ; software without specific prior written permission. ; ; ; ; THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY ; ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT ; ; SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, ; ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED ; ; TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************************; ; ;+ ; The program implements a Taylor Diagram in IDL direct graphics. Addtional information can be found ; `in this article `. ; ; .. image:: cgtaylordiagram.png ; ; From the 2001 IPCC Reoprt:: ; ; "Taylor diagrams provide a way of graphically summarizing how closely ; a pattern (or a set of patterns) matches observations. The similarity between two ; patterns is quantified in terms of their correlation, their centered root-mean-square ; difference and the amplitude of their variations (represented by their standard ; deviations). These diagrams are especially useful in evaluating multiple aspects of ; complex models or in gauging the relative skill of many different models." ; ; "In general, the Taylor diagram characterizes the statistical relationship between two ; fields, a "test" field (often representing a field simulated by a model) and a ; "reference" field (usually representing “truth”, based on observations)." ; ; "The two-dimensional space of the Taylor diagram can represent three different statistics ; simultaneously:: ; - The centered RMS difference, ; - The correlation, ; - The standard deviation ; ; :Categories: ; Graphics ; ; :Params: ; correlation: in, required, type=float ; An array of correlation coefficients for the points that will be plotted on the diagram. ; This array must be the same length as the `stddev` array and the `Labels` array, if it is used. ; stddev: in, required, type=float ; An array of standard deviations for the points that will be plotted on the diagram. ; This array must be the same length as the `correlation` array and the `Labels` array, if it is used. ; ; :Keywords: ; addcmd: in, optional, type=boolean, default=0 ; Set this keyword to add the command to the resizeable graphics window cgWindow. ; c_correlation: in, optional, type=string, default="grn7" ; The name of the color used for the correlation lines on the diagram. ; c_stddev: in, optional, type=string, default="blu7" ; The name of the color used for the standard deviation lines on the diagram. ; c_ref: in, optional, type=string, default="pur7" ; The name of the color used for the observed reference line on the diagram. ; c_symbol: in, optional, type=string, default="red" ; The name of the color used for the point symbols on the diagram. ; labels: in, optional, type=string ; An array of string labels for the points that will be plotted on the diagram. ; This array must be the same length as the `stddev` array and the `correlation` array. ; noerase: in, optional, type=boolean, default=0 ; Set this keyword if you don't want the Taylor Diagram plot to erase what is already on ; the display. ; output: in, optional, type=string ; The name of an output file to write the Taylor Diagram to. The type of file is taken from ; the file extension. For example, OUTPUT='mydiagram.png'. It is assumed that Ghostscript and ; ImageMagick have been installed properly for all raster file output. If the Output keyword is ; used, nothing is drawn on the display. This keyword cannot be used with the Overplot keyword. ; overplot: in, optional, type=boolean, default=0 ; Set this keyword to overplot onto an already existing Taylor Diagram. Many keywords are ; ignored if this keyword is set. Only the data is drawn. The Output keyword cannot be used ; if overplotting. ; position: in, optional, type=float ; A four-element, normalized array giving the position of the plot in the display window: [x0,y0,x1,y1]. ; ref_stddev: in, optional, type=float, default=1.0 ; The reference standard deviation. This is typically the "observed" or "model" value. A scalar. ; rms_circles_off: in, optional, type=boolean, default=0 ; Set this keyword to prevent the drawing of the RMS circles that radiate out from the observed RMS value. ; rms_format: in, optional, type=string, default='(I0)' ; Set this keyword to a format string that is used for format the RMS circle labels. ; rms_increment: in, optional, type=float, default=1.0 ; The RMS circles are drawn from the observed RMS value, using this value as an increment of the circle radius. ; rms_labels_off: in, optional, type=boolean, default=0 ; Set this keyword to prevent the drawing of the RMS circle labels. If this keyword is set, only the RMS ; circles are drawn. ; stddev_max: in, optional, type=float ; The maximum standard deviation to plot on the graph. ; symbol: in, optional, type=integer, default=16 ; The symbol used for the data points on the diagram. Any symbol supported by `cgSymCat`. ; symsize: in, optional, type=float, default=1.5 ; The size of the symbol used for the data points on the diagram. ; window: in, optional, type=boolean, default=0 ; Set this keyword to replace all the commands in a current cgWindow or to ; create a new cgWindow for displaying this command. ; ; :Examples: ; Here is how to use this program:: ; ; labels = ['A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'] ; Point labels. ; stddev = [1.4, 0.9, 1.0, 1.272, 1.1, 0.95, 1.08, 0.5] ; Standard Deviations ; correlation = [0.8, 0.9, 0.65, 0.74, 0.91, 0.98, 0.85, 0.35] ; Correlations ; ref_std = 1.0 ; Reference standard (observed) ; stddev_max = 1.5 ; Standard Deviation maximum ; cgTaylorDiagram, stddev, correlation, REF_STDDEV=ref_std, STDDEV_MAX=stddev_max, LABELS=labels ; ; :Author: ; FANNING SOFTWARE CONSULTING:: ; David W. Fanning ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: david@idlcoyote.com ; Coyote's Guide to IDL Programming: http://www.idlcoyote.com ; ; :History: ; Change History:: ; Written, 10 January 2013 by David W. Fanning from a program by Fernando Santoro of ; ExelisVis that I found in the IDL Code Repository on the ExelisVis web page. ; Fernando did *all* of the hard work writing the program for the IDL 8 function ; graphics routine. I simply copied most of his code and adapted it for non-IDL 8 ; users. I also added a couple of features I though were missing from the original code. ; Added OVERPLOT keyword. 21 May 2013. DWF. ; Added RMS_*** keywords to allow more control over the drawing and labeling of the RMS circles ; on the plot. 29 July 2013. DWF. ; Modified the algorithm that places the "Correlation" label to allow multiple plots in a ; window. Also removed a cgPolyFill command that appeared to have no effect. 19 Nov 2013. DWF. ; Added NOERASE keyword and made sure no window was opened when OUTPUT keyword is used. 21 Nov 2013. DWF. ; ; :Copyright: ; Copyright (c) 2013, Fanning Software Consulting, Inc. ;- PRO cgTaylorDiagram, stddev, correlation, $ ADDCMD=addcmd, $ C_CORRELATION=c_correlation, $ C_STDDEV=c_stddev, $ C_REF=c_ref, $ C_SYMBOL=c_symbol, $ LABELS=labels, $ NOERASE=noerase, $ OUTPUT=output, $ OVERPLOT=overplot, $ POSITION=position, $ REF_STDDEV=ref_stddev, $ RMS_CIRCLES_OFF=rms_circles_off, $ RMS_FORMAT=rms_format, $ RMS_INCREMENT=rms_increment, $ RMS_LABELS_OFF=rms_labels_off, $ STDDEV_MAX=stddev_max, $ SYMBOL=symbol, $ SYMSIZE=symsize, $ WINDOW=window Compile_Opt idl2 ; Standard error handling. Catch, theError IF theError NE 0 THEN BEGIN Catch, /CANCEL void = cgErrorMsg() IF N_Elements(currentState) NE 0 THEN cgSetColorState, currentState RETURN ENDIF overplot = Keyword_Set(overplot) noerase = Keyword_Set(noerase) ; Are we doing some kind of output? IF (N_Elements(output) NE 0) && (output NE "") && ~overplot THEN BEGIN ; Determine the type of file from the filename extension. root_name = cgRootName(output, DIRECTORY=theDir, EXTENSION=ext) IF theDir EQ "" THEN CD, CURRENT=theDir outfilename = output outputSelection = StrUpCase(ext) typeOfOutput = ['PS','EPS','PDF','BMP','GIF','JPEG','JPG','PNG','TIFF', 'TIF'] void = Where(typeOfOutput EQ outputSelection, count) IF count EQ 0 THEN Message, 'Cannot find ' + outputSelection + ' in allowed output types.' ; Set things up. CASE outputSelection OF 'PS': BEGIN ext = '.ps' delete_ps = 0 END 'EPS': BEGIN ext = '.eps' encapsulated = 1 delete_ps = 0 END 'PDF': BEGIN ext = '.pdf' pdf_flag = 1 delete_ps = 1 END 'BMP': BEGIN ext = '.bmp' bmp_flag = 1 delete_ps = 1 END 'GIF': BEGIN ext = '.gif' gif_flag = 1 delete_ps = 1 END 'JPEG': BEGIN ext = '.jpg' jpeg_flag = 1 delete_ps = 1 END 'JPG': BEGIN ext = '.jpg' jpeg_flag = 1 delete_ps = 1 END 'PNG': BEGIN ext = '.png' png_flag = 1 delete_ps = 1 END 'TIFF': BEGIN ext = '.tif' tiff_flag = 1 delete_ps = 1 END 'TIF': BEGIN ext = '.tif' tiff_flag = 1 delete_ps = 1 END ENDCASE ; We need to know the root name of the file, because we have to make a PostScript ; file of the same name. At least we do if the type is not PS or EPS. IF (outputSelection NE 'PS') && (outputSelection NE 'EPS') THEN BEGIN root_name = cgRootName(outfilename, DIRECTORY=theDir) IF theDir EQ "" THEN CD, CURRENT=theDir ps_filename = Filepath(ROOT_DIR=theDir, root_name + '.ps') ENDIF ELSE ps_filename = outfilename ; Get the output default values. cgWindow_GetDefs, $ PS_Charsize = ps_charsize, $ ; The PostScript character size. PS_FONT = ps_font, $ ; Select the font for PostScript output. PS_Decomposed = ps_decomposed, $ ; Sets the PostScript color mode. PS_Delete = ps_delete, $ ; Delete PS file when making IM raster. PS_Metric = ps_metric, $ ; Select metric measurements in PostScript output. PS_Scale_factor = ps_scale_factor, $ ; Select the scale factor for PostScript output. PS_TT_Font = ps_tt_font ; Select the true-type font to use for PostScript output. ; Set up the PostScript device. cgPS_Open, $ CHARSIZE=ps_charsize, $ DECOMPOSED=ps_decomposed, $ FILENAME=ps_filename, $ FONT=ps_font , $ ENCAPSULATED=encapsulated, $ METRIC=ps_metric, $ SCALE_FACTOR=ps_scale_factor, $ TT_FONT=ps_tt_font, $ QUIET=1 ENDIF ; Set up PostScript device for working with colors. IF !D.Name EQ 'PS' THEN Device, COLOR=1, BITS_PER_PIXEL=8 ; Do they want this plot in a resizeable graphics window? IF Keyword_Set(addcmd) THEN window = 1 IF Keyword_Set(window) AND ((!D.Flags AND 256) NE 0) THEN BEGIN ; Special treatment for overplotting or adding a command. IF Keyword_Set(addcmd) THEN BEGIN cgWindow, 'cgTaylorDiagram', stddev, correlation, $ C_CORRELATION=c_correlation, $ C_STDDEV=c_stddev, $ C_REF=c_ref, $ C_SYMBOL=c_symbol, $ LABELS=labels, $ NOERASE=noerase, $ OUTPUT=output, $ OVERPLOT=overplot, $ POSITION=position, $ REF_STDDEV=ref_stddev, $ RMS_CIRCLES_OFF=rms_circles_off, $ RMS_FORMAT=rms_format, $ RMS_INCREMENT=rms_increment, $ RMS_LABELS_OFF=rms_labels_off, $ STDDEV_MAX=stddev_max, $ SYMBOL=symbol, $ SYMSIZE=symsize, $ ADDCMD=1 RETURN ENDIF ; Open a new window or replace the current commands, as required. currentWindow = cgQuery(/CURRENT, COUNT=wincnt) IF wincnt EQ 0 THEN replaceCmd = 0 ELSE replaceCmd=1 cgWindow, 'cgTaylorDiagram', stddev, correlation, $ C_CORRELATION=c_correlation, $ C_STDDEV=c_stddev, $ C_REF=c_ref, $ C_SYMBOL=c_symbol, $ LABELS=labels, $ NOERASE=noerase, $ OUTPUT=output, $ OVERPLOT=overplot, $ POSITION=position, $ REF_STDDEV=ref_stddev, $ RMS_CIRCLES_OFF=rms_circles_off, $ RMS_FORMAT=rms_format, $ RMS_INCREMENT=rms_increment, $ RMS_LABELS_OFF=rms_labels_off, $ STDDEV_MAX=stddev_max, $ SYMBOL=symbol, $ SYMSIZE=symsize, $ REPLACECMD=replaceCmd RETURN ENDIF ; Do this in decomposed color mode. cgSetColorState, 1, CURRENT=currentState ; Check parameters. IF N_Params() NE 2 THEN BEGIN Print, 'Calling Syntax: cgTaylorDiagram, stddev, correlation' RETURN ENDIF ; Default values for keywords. SetDefaultValue, c_correlation, 'grn7' SetDefaultValue, c_stddev, 'blu7' SetDefaultValue, c_ref, 'pur7' SetDefaultValue, c_symbol, 'red' SetDefaultValue, symbol, 16 SetDefaultValue, symsize, 1.5 SetDefaultValue, ref_stddev, 1.0 SetDefaultValue, rms_increment, 1.0 SetDefaultValue, rms_format, '(I0)' SetDefaultValue, stddev_max, Round((Max(stddev) * 1.25) * 10)/ 10.0 ; Skip all this if you are overplotting IF overplot THEN GOTO, overplotComeHere ; Construction of the diagram. ; PART I: Outer Axis circle and RMS circles cir_npts = 1000 ;number of points of the outer circle x = Findgen(cir_npts)/(cir_npts-1) * stddev_max y = SQRT(stddev_max^2 - x^2) ; Equation of Outer circle. stddev_max is maximun of the radius of the Correlation Circle Axis IF N_Elements(position) EQ 0 && (Total(!P.Multi) LE 0) && (Total(!P.Position) EQ 0.0) THEN BEGIN position = [0.125, 0.125, 0.9, 0.9] ENDIF ; Initial plot in window. IF (!D.Window LT 0) && (~overplot) THEN cgDisplay, 680, 640 cgPlot, x, y, /NoData, XTITLE='Standard Deviation', YTITLE='Standard Deviation', $ XSTYLE=9, YSTYLE=9, POSITION=position, BACKGROUND='white', NOERASE=noerase ; PART II: Building ticks: Long and Short ticks ; Long Ticks nticks = 10 cir_ticks = Findgen(nticks)/nticks * stddev_max ; Coordinates of the two extremes of the ticks for the outer circle: we will create a polyline as ticks long_x_right = cir_ticks long_y_right = SQRT(stddev_max^2 - cir_ticks^2) long_x_left = FltArr(nticks) long_y_left = FltArr(nticks) ; Multiple RMS circles multi_cir = 1000 ; Number of points of each RMS circle number_cirs = Fix((stddev_max / rms_increment)) + 5 ; Number of RMS circles initial_rms_increment = rms_increment IF ~Keyword_Set(rms_circles_off) THEN BEGIN FOR i=0, number_cirs-1 DO BEGIN multi_max = ref_stddev + rms_increment multi_min = ref_stddev - rms_increment multi_circlesx = Findgen(multi_cir)/(multi_cir-1)*(multi_max-multi_min)+multi_min multi_circlesy = SQRT(rms_increment^2 - (multi_circlesx-ref_stddev)^2) cgPlotS, 0 > multi_circlesx < stddev_max, 0 > multi_circlesy < stddev_max, COLOR=c_stddev, LINESTYLE=1 number = String(rms_increment, Format=rms_format) IF ~Keyword_Set(rms_labels_off) THEN BEGIN IF (multi_circlesx[i+50] GT 0) AND (multi_circlesx[i+50] LT stddev_max) THEN BEGIN cgText, multi_circlesx[i+50], multi_circlesy[i+50], number, $ CHARSIZE=cgDefCharsize()*0.8, ALIGNMENT=1, /DATA, CLIP=0, COLOR=c_stddev ENDIF ENDIF rms_increment = initial_rms_increment + rms_increment ENDFOR ENDIF ; Mask: Masking part of the RMS circles out: cgColorFill, [x, stddev_max, x[0]],[y, stddev_max, y[0]], /data, COLOR='white' cgPolygon, [x, stddev_max, x[0]],[y, stddev_max, y[0]], /data, COLOR='white' ; Not sure this is needed. Certainly not on my windows machine in IDL 8.2.3. ; cgColorFill, [!X.Window[0],!X.Window[0], !X.Window[1], !X.Window[1], !X.Window[0]], $ ; [!Y.Window[1], 1.0, 1.0, !Y.Window[1]], $ ; /Normal, COLOR='white' cgPlotS, x, y ; Short Ticks ; new circle where its points will be used as the end point of the short ticks short_cir = 1000 short_max = stddev_max*.98 short_min = 0.0 short_cir_x = Findgen(short_cir)/(short_cir-1)*(short_max-short_min)+short_min short_cir_y = SQRT(short_max^2 - short_cir_x^2) ;Some points of the new circle to be used as ticks short_nticks = 20 shortx = Findgen(short_nticks)/short_nticks *(short_max-short_min)+short_min shorty = SQRT(short_max^2 - shortx^2) select_shortx = FltArr(nticks) select_shorty = FltArr(nticks) j = 0 FOR i=0, short_nticks-1, 2 DO BEGIN select_shortx[j] = shortx[i+1] select_shorty[j] = shorty[i+1] j = j+1 ENDFOR ; Some points of the outer circle to be used as extremes for the short ticks outer_shortx = Findgen(short_nticks)/short_nticks * stddev_max outer_shorty = SQRT(stddev_max^2 - outer_shortx^2) select_outerx = FltArr(nticks) select_outery = FltArr(nticks) j = 0 FOR i=0, short_nticks-1, 2 DO BEGIN select_outerx[j] = outer_shortx[i+1] select_outery[j] = outer_shorty[i+1] j = j+1 ENDFOR angles = FltArr(nticks) text_ang = FltArr(nticks) ; Plotting correlation lines and ticks. FOR i=0,nticks-1 DO BEGIN cgPlotS, [long_x_right[i], long_x_left[i]], [long_y_right[i], long_y_left[i]], $ COLOR=((i EQ 0) ? 'black' : c_correlation) cgPlotS, [select_outerx[i], select_shortx[i]], [select_outery[i], select_shorty[i]] ;the following IF statement is here because for i=0,long_x_right[i]=0.0 ;and therefore I get: % Program caused arithmetic error: Floating divide by 0 in line 102 IF long_x_right[i] EQ 0.0 THEN BEGIN angles[i] = 1.57080 ;90 degrees radians ENDIF ELSE BEGIN angles[i] = atan(long_y_right[i]/long_x_right[i]) ENDELSE text_ang[i] = angles[i]*(180.0/!PI) tick_number = [' 0.0', ' 0.1', ' 0.2', ' 0.3', ' 0.4', ' 0.5', ' 0.6', ' 0.7', ' 0.8', ' 0.9'] cgText, long_x_right[i], long_y_right[i], tick_number[i], ORIENTATION=text_ang[i], $ CLIP=0, COLOR=c_correlation, CHARSIZE=cgDefCharsize()*0.85 ENDFOR last_angle = atan(select_outery[nticks-1]/select_outerx[nticks-1]) short_last_ang = last_angle*(180.0/!PI) cgText, select_outerx[nticks-1], select_outery[nticks-1], ' 0.95', ORIENTATION=short_last_ang, $ CLIP=0, COLOR=c_correlation, CHARSIZE=cgDefCharsize()*0.85 cgText, stddev_max, y[N_Elements(y)-1], ' 1.0', CHARSIZE=cgDefCharsize()*0.85, CLIP=0, COLOR=c_correlation ;Extra ticks between correlation values 0.9 and 1: ;Even Shorter Ticks ; new circle where its points will be used as the end point of the Extra short ticks extrashort_cir = 1000 extrashort_max = stddev_max*.99 sector_x = cos(angles[nticks-1]) * extrashort_max extrashort_min = sector_x extrashort_cir_x = Findgen(extrashort_cir)/(extrashort_cir-1)*(extrashort_max-extrashort_min)+extrashort_min extrashort_cir_y = SQRT(extrashort_max^2 - extrashort_cir_x^2) ;Select some points of the last angular sector to be used as ticks: outer circle and inside circle: extrashort_nticks = 10 extrashort_outermax = stddev_max sector_outerx = cos(angles[nticks-1]) * stddev_max extrashort_outermin = sector_outerx extrashort_outerx = Findgen(extrashort_nticks)/(extrashort_nticks)*(stddev_max-extrashort_outermin)+extrashort_outermin extrashort_outery = SQRT(stddev_max^2 - extrashort_outerx^2) extrashortx = Findgen(extrashort_nticks)/(extrashort_nticks) *(extrashort_max-extrashort_min)+extrashort_min extrashorty = SQRT(extrashort_max^2 - extrashortx^2) FOR i=0, extrashort_nticks-1 DO BEGIN cgPlots, [extrashort_outerx[i], extrashortx[i]], [extrashort_outery[i], extrashorty[i]], COLOR=c_correlation ENDFOR ; Correlation Axis Name cc_namex = (!X.Window[1] - !X.Window[0]) * 0.775 + !X.Window[0] cc_namey = (!Y.Window[1] - !Y.Window[0]) * 0.775 + !Y.Window[0] cgText, cc_namex, cc_namey, 'Correlation', ORIENTATION=-45., ALIGNMENT=0.5, $ COLOR=c_correlation, /NORMAL ; Observed/Reference Circles. The dashed circles centered in the Observed value are the centered RMS ; (root-mean-square) values. ref_cir = 1000 ref_max = ref_stddev ref_min = 0.0 ref_cir_x = Findgen(ref_cir)/(ref_cir-1)*(ref_max-ref_min)+ref_min ref_cir_y = SQRT(ref_max^2 - ref_cir_x^2) cgPlots, ref_cir_x, ref_cir_y, LINESTYLE=2, COLOR='pur7' cgText, ref_max, stddev_max * 0.05, 'Observed', ALIGNMENT=0.5, COLOR='pur7' ; PART III: Plotting the Input Data Points overplotComeHere: dataangle = ACos( correlation ) data_x = stddev * Cos( dataangle ) data_y = stddev * Sin( dataangle ) cgPlotS, data_x, data_y, PSYM=symbol, COLOR=c_symbol, SymSize=symsize xy = Convert_Coord(data_x, data_y, /DATA, /TO_NORMAL) squib = 0.0075 IF N_Elements(labels) NE 0 THEN BEGIN cgText, xy[0,*], xy[1,*] + 2*squib, labels, /NORMAL, FONT=0, ALIGNMENT=0.5 ENDIF ; Are we producing output? If so, we need to clean up here. IF (N_Elements(output) NE 0) && (output NE "") && (~overplot) THEN BEGIN ; Get the output default values. cgWindow_GetDefs, $ IM_Density = im_density, $ ; Sets the density parameter on ImageMagick convert command. IM_Options = im_options, $ ; Sets extra ImageMagick options on the ImageMagick convert command. IM_Resize = im_resize, $ ; Sets the resize parameter on ImageMagick convert command. IM_Transparent = im_transparent, $ ; Sets the "alpha" keyword on ImageMagick convert command. IM_Width = im_width, $ ; Sets the width of raster file output created with ImageMagick. PDF_Unix_Convert_Cmd = pdf_unix_convert_cmd, $ ; Command to convert PS to PDF. PDF_Path = pdf_path ; The path to the Ghostscript conversion command. ; Close the PostScript file and create whatever output is needed. cgPS_Close, DELETE_PS=delete_ps, $ ALLOW_TRANSPARENT=im_transparent, $ BMP=bmp_flag, $ DENSITY=im_density, $ GIF=gif_flag, $ GS_PATH=pdf_path, $ IM_OPTIONS=im_options, $ JPEG=jpeg_flag, $ PDF=pdf_flag, $ PNG=png_flag, $ RESIZE=im_resize, $ TIFF=tiff_flag, $ UNIX_CONVERT_CMD=pdf_unix_convert_cmd, $ WIDTH=im_width basename = File_Basename(outfilename) dirname = File_Dirname(outfilename) IF dirname EQ "." THEN CD, CURRENT=dirname Print, 'Output File: ' + Filepath(ROOT_DIR=dirname, basename) ENDIF ; Restore color mode. cgSetColorState, currentState END ;####################################### Main Test Program ############################################# cgDisplay, 700, 700 labels = ['A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'] ; Point labels. stddev = [1.4, 0.9, 1.0, 1.272, 1.1, 0.95, 1.08, 0.5] ; Standard Deviations correlation = [0.8, 0.9, 0.65, 0.74, 0.91, 0.98, 0.85, 0.35] ; Correlations ref_std = 1.0 ; Reference standard (observed) stddev_max = 1.5 ; Standard Deviation maximum cgTaylorDiagram, stddev, correlation, REF_STDDEV=ref_std, STDDEV_MAX=stddev_max, $ RMS_INCREMENT=0.25, RMS_FORMAT='(F0.2)', LABELS=labels labels = ['I', 'J', 'K', 'L', 'M', 'N', 'O', 'P'] ; Point labels. stddev = [1.25, 0.7, 1.1, 0.86, 1.5, 1.21, 0.78, 0.52] ; Standard Deviations correlation = Reverse([0.8, 0.9, 0.65, 0.74, 0.91, 0.98, 0.85, 0.35]) ; Correlations cgTaylorDiagram, stddev, correlation, /OVERPLOT, LABELS=labels, C_SYMBOL='blue' END