Extended Help for DustemWrap routines

This page was created by the IDL library routine mk_html_help. For more information on this routine, refer to the IDL Online Help Navigator or type: 

     ? mk_html_help

at the IDL command line prompt.

Last modified: Wed Jun 8 12:10:31 2011.

List of Routines

Routine Descriptions

DUSTEM_CC

 [Next Routine] [List of Routines] 
 NAME:
    dustem_cc
 PURPOSE:
    Computes observed sed and color correction for a given spectrum in a given filter
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    sed=dustem_cc(wave,spec,filter_names,cc=cc,fluxconv=fluxconv,help=help)
 INPUTS:
    wave: array of wavelengths for spec
    spec: spectrum (must be in brightness units)
    filter_names: names of filters for which color correction is needed
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    sed: SED as observed in filters provided in filter_names
 OPTIONAL OUTPUT PARAMETERS:
    cc        = color correction coefficients (spec*cc=sed)
 ACCEPTED KEY-WORDS:
    fluxconv  = if set, these are taken for flux conventions
              possible values: 'nuInu=cste', 'IRAC', 'MIPS', 'CMB'
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    
 MODIFICATION HISTORY:
    Written by J.P. Bernard April 18th 2011
    replaces individual cc routines for various instruments
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_cc.pro)

DUSTEM_COMPUTE_SED

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_compute_sed
 PURPOSE:
    Computes an SED from a given Dustem spectrum
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    sed=dustem_compute_sed(p_dim[,st=][,cont=][,_extra=][,/help])
 INPUTS:
    p_dim      = parameter values
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    sed       = computed SED for filters in !dustem_data
 OPTIONAL OUTPUT PARAMETERS:
    st        = Dustem output structure
    cont      = NIR continuum
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_compute_sed.pro)

DUSTEM_FILTER2FLUXCONV

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_filter2fluxconv
 PURPOSE:
    Returns flux convention given filter name
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    flx_conv=dustem_filter2fluxconv(filter[,/help])
 INPUTS:
    filter  = Filter name
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    flx_conv = Flux convention string
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    Reads instrument_description.xcat at each call. Not optimal.
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    print,dustem_filter2fluxconv(['IRAS1','MIPS3'])
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_filter2fluxconv.pro)

DUSTEM_FILTER2INSTRU

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_filter2instru
 PURPOSE:
    Returns instrument name given filter name
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    inst_name=dustem_filter2instru(filter[,/help])
 INPUTS:
    filter  = Filter name
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    inst_name = Instrument name
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    Reads instrument_description.xcat at each call. Not optimal.
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    print,dustem_filter2instru(['IRAS1','MIPS3'])
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_filter2instru.pro)

DUSTEM_FILTER2WAV

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_filter2wav
 PURPOSE:
    Returns reference wavelength given filter name
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    wave=dustem_filter2wav(filter[,/help])
 INPUTS:
    filter  = Filter name
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    wave = reference wavelength (microns)
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    Reads instrument_description.xcat at each call. Not optimal.
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    print,dustem_filter2wav(['IRAS1','MIPS3'])
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_filter2wav.pro)

DUSTEM_FILTER_INIT

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_filter_init
 PURPOSE:
    Initializes the dustem filter structure (!dustem_filters)
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_filter_init[,dir=]
 INPUTS:
    None
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    initializes !dustem_filters
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init
    dustem_filter_init
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_filter_init.pro)

DUSTEM_FIT_SED_README

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_fit_sed_readme
 PURPOSE:
    This is an example of how to fit SEDs with the dustem wrapper.
    It is meant to be an example to follow when writing your own
    programs using the dustem IDL wrapper.
    It is not meant to reproduce the result in Compiegne et al 2010
    The SED used here is in sample_SED.xcat
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_fit_sed_readme,postcript=postcript,mode=mode,help=help
 INPUTS:
    None
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    mode = Selects one of the dust mixture used by dustem
           'COMPIEGNE_ETAL2010' from Compiegne et al 2010 (default)
           'DBP90' from Desert et al 1990
           'DL01' from Draine & Li 2001
           'DL07' from Draine & Li 2007
    postcript = if set plot is done in DUSTEM/Docs/Figures/Last_dustem_fit.ps
    help      = If set print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem fortran code must be installed
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_fit_sed_readme,mode='COMPIEGNE_ETAL2010'
 MODIFICATION HISTORY:
    Written by J.P. Bernard April 1st 2011
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_fit_sed_readme.pro)

DUSTEM_INIT

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
   dustem_init
 CALLING SEQUENCE:
   dustem_init
 PURPOSE:
   Defines system variables to run the DUSTEM code
 INPUTS:
    mode    = Selects one of the dust mixture used by dustem
              'COMPIEGNE_ETAL2010' from Compiegne et al 2010 (default)
              'DBP90' from Desert et al 1990
              'DL01' from Draine & Li 2001
              'DL07' from Draine & Li 2007
   dir      = overrides default directory where to read data
   wraptest = test running dustem f90 through the wrapper
   plot_it  = plots run result (only if wraptest)
   help     = If set print this help
 OPTIONAL INPUT:
   None
 OUTPUTS:
   None
 PROCEDURE AND SUBROUTINE USED
    1/ The folowing system variables are initialized to null values
	or empty pointers:
       !dustem_fit
       !dustem_data
       !dustem_inputs
       !dustem_params
       !run_ionfrac
       !dustem_idl_continuum
       !dustem_filters
       !dustem_verbose
       !dustem_show_plot
    2/ optionally runs the fortran code (if wraptest)
       This step calls the Fortran code to run a standard model
    3/ !dustem_filters is initialized calling dustem_filter_init.pro.
 RESTRICTIONS:
    The dustem fortran code must be installed
    The dustem idl wrapper must be installed
 EXAMPLES
    dustem_init,/wrap,/plot_it
 MODIFICATION HISTORY:
    See cvs logs
    Written by JPB,NF,DP Jan-2007
    see evolution details on the dustem cvs maintained at CESR

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_init.pro)

DUSTEM_PLANCK_FUNCTION

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
	dustem_planck_function
 PURPOSE: 
	To calculate the Planck function in units of MJy/sr 

 CALLING SEQUENCE: 
	bbflux = dustem_planck_function(temp,wave) 

 INPUT PARAMETERS: 
	WAVE   in microns
	TEMP   Scalar giving the temperature of the planck function in degree K

 OUTPUT PARAMETERS:
	BBFLUX - Scalar or vector giving the planck function at the specified
		wavelength points.

 EXAMPLES:

 RESTRICTIONS:
	Values less than approximately 1E-24 are truncated to 0.

 PROCEDURE:

 MODIFICATION HISTORY:

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_planck_function.pro)

DUSTEM_PLOT_EXTINCTION

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
     dustem_plot_extinction
 PURPOSE:
    Plots a Dustem extinction
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_plot_extinction,st,st_model[,/help][,_extra=]
 INPUTS:
    st        = Dustem model output structure
    st_model  = Dustem model parameters structure
 OPTIONAL INPUT PARAMETERS:
    _extra    = extra parameters for the plot routine
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    model is plotted
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init,/wrap
    dir_in=getenv('DUSTEM_SOFT_DIR')+'/src/dustem3.8_web/'
    st_model=dustem_read_all(dir_in)
    dir=getenv('DUSTEM_RES')
    st=dustem_read_all_res(dir_in)
    loadct,13
    dustem_plot_extinction,st,st_model,yr=[1.e-6,1.e0],/ysty,xr=[1.,400],/xsty
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_plot_extinction.pro)

DUSTEM_PLOT_FIT_SED

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_plot_fit_sed
 PURPOSE:
    Plots a Dustem model and SED. Parameter values and error are
    printed on plot. Used for plotting results during fit.
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_plot_fit_sed,st,sed,cont[,/no_spec_error][,res=][,errors=][,chi2=][,rchi2=][/help][_extra=]
 INPUTS:
    st        = Dustem model output structure
    sed       = Dustem model SED
    cont      = Dustem model NIR continuum
 OPTIONAL INPUT PARAMETERS:
    res       = fit result values. If set values are written on plot.
    errors    = fit result errors. If set values are written on plot.
    chi2      = fit chi^2. if set value is written on plot.
    rchi2     = Reduced fit chi^2. if set value is written on plot.
    _extra    = extra parameters for the plot routine
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    SED and model are plotted
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_plot_fit_sed,st,sed,cont
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_plot_fit_sed.pro)

DUSTEM_PLOT_NUINU_EM

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
     dustem_plot_nuinu_em
 PURPOSE:
    Plots a Dustem spectrum
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_plot_fit_sed,st[,/help][,_extra=]
 INPUTS:
    st        = Dustem model output structure
 OPTIONAL INPUT PARAMETERS:
    _extra    = extra parameters for the plot routine
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    model is plotted
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init,/wrap
    dir=getenv('DUSTEM_RES')
    st=dustem_read_all_res(dir)
    dustem_plot_nuinu_em,st,yr=[1e-28,1.e-22],/ysty,xr=[1,5e3],/xsty
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_plot_nuinu_em.pro)

DUSTEM_READ_ALL

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_read_all
 PURPOSE:
    Reads all Dustem input data
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    st=dustem_read_all(dir_in,silent=silent,help=help)
 INPUTS:
    dir_in: input directory
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    st: input structure
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    silent    = If set, function is silent
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init
    dir=getenv('DUSTEM_SOFT_DIR')+'/src/dustem3.8_web/'
    st=dustem_read_all(dir)
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_read_all.pro)

DUSTEM_READ_ALL_RES

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_read_all_res
 PURPOSE:
    Reads all Dustem outputs
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    st=dustem_read_all_res(dir_out[,/silent][,/help])
 INPUTS:
    dir_out: Dustem output directory
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    st: Dustem output structure
      structure:
      DUSTEM          STRUCT    ->  Array[800]
        WAV             FLOAT         0.0400000
        EM_GRAIN_1      FLOAT           0.00000
        EM_GRAIN_2      FLOAT           0.00000
        EM_GRAIN_3      FLOAT           0.00000
        EM_GRAIN_4      FLOAT           0.00000
        EM_GRAIN_5      FLOAT           0.00000
        EM_TOT          FLOAT           0.00000
      EXT             STRUCT    ->  Array[799]
        WAV             FLOAT         0.0406570
        ABS_GRAIN       FLOAT     Array[5]
        SCA_GRAIN       FLOAT     Array[5]
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
    silent    = If set, function is silent
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init,/wrap
    dir=getenv('DUSTEM_RES')
    st=dustem_read_all_res(dir)
    help,st,/str
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_read_all_res.pro)

DUSTEM_RESTORE_SED_FIT

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_restore_sed_fit
 PURPOSE:
    Restore Dustem SED fit results from a file.
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_restore_sed_fit,file[,/help]
 INPUTS:
    file      = File name
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    The !dustem_fit structure is updated
    The !dustem_data, !dustem_filters, !dustem_verbose and
    !run_ionfrac are also affected.
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_fit_sed_readme
    file=getenv('DUSTEM_RES')+'DUSTEM_fit_example.sav'
    dustem_restore_sed_fit,file
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_restore_sed_fit.pro)

DUSTEM_RUN

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_run
 PURPOSE:
    Runs the DUSTEM code and returns the results into a structure.
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    st=dustem_run(params[,/help])
 INPUTS:
    params = model parameter values
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    st: output structure
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    st=dustem_run(params)
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard, N. Flagey, D. Paradis Jan 2007
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_run.pro)

DUSTEM_RUN_README

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_run_readme
 PURPOSE:
    This is an example of how to run dustem SEDs with the dustem wrapper.
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_run_readme,mode=mode,help=help,/postcript,/help,/plot_it
 INPUTS:
    None
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    mode = Selects one of the dust mixture used by dustem
           'COMPIEGNE_ETAL2010' from Compiegne et al 2010 (default)
           'DBP90' from Desert et al 1990
           'DL01' from Draine & Li 2001
           'DL07' from Draine & Li 2007
    postcript = if set, plot is done in DUSTEM/Docs/Figures/Last_dustem_fit.ps
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem fortran code must be installed
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_run_readme,mode='COMPIEGNE_ETAL2010'
 MODIFICATION HISTORY:
    Written by J.P. Bernard April 1st 2011
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_run_readme.pro)

DUSTEM_SAVE_SED_FIT

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_save_sed_fit
 PURPOSE:
    Save Dustem SED fit results in a file
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_save_sed_fit,file[,/help]
 INPUTS:
    file      = File name
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    File is stored.
    The stored data are taken from !dustem_fit, !dustem_data,
    !dustem_filters, !dustem_verbose and !run_ionfrac
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_save_sed_fit.pro)

DUSTEM_SET_DATA

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
    dustem_set_data
 PURPOSE:
    Initializes the dustem data structure (!dustem_data)
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_set_data,spec[,help=]
 INPUTS:
    spec: array of structures containing a SED
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    initializes !dustem_data
    wavelengths are forced to be the central filter wavelength for
    photometric data
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init
    dir=getenv('DUSTEM_SOFT_DIR')+'/src/dustem3.8_web/SEDs/'
    file=dir+'Gal_composite_spectrum.xcat'
    spec=read_xcat(file,/silent)
    dustem_set_data,spec
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_set_data.pro)

DUSTEM_SET_FUNC_IND

 [Previous Routine] [Next Routine] [List of Routines] 
 NAME:
       dustem_set_func_ind
 CALLING SEQUENCE:
       dustem_set_func_ind
 PURPOSE:
	Sorts the parameter descriptions and values the way they must
	be processed.
 INPUTS:
       None
 OPTIONAL INPUT:
       None
 OUTPUTS:
       None
 PROCEDURE AND SUBROUTINE USED
       Parameter description (!param_desc) and values (!init_value) are
       ordered the way they should be processed. The ordered information
       is put into system variables !PDO and !IDO respectively
       If the isrf is being modified, then, PAH ionization fraction
       is set to be updated as well.
 SIDE EFFECTS:
       !PDO and !IDO variables are set.
       Optionally !ionfrac is set.
       The !func_ind variable is set.
 MODIFICATION HISTORY:
       See cvs logs
       Written by NF,JPB,DP Jan-2007

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_set_func_ind.pro)

DUSTEM_WRITE_ALL

 [Previous Routine] [List of Routines] 
 NAME:
    dustem_write_all
 PURPOSE:
    Write all Dustem input data
 CATEGORY:
    Dustem
 CALLING SEQUENCE:
    dustem_write_all,st,dir_out[,/help]
 INPUTS:
    st: Dustem input structure
    dir_out: output directory
 OPTIONAL INPUT PARAMETERS:
    None
 OUTPUTS:
    None
 OPTIONAL OUTPUT PARAMETERS:
    None
 ACCEPTED KEY-WORDS:
    help      = If set, print this help
 COMMON BLOCKS:
    None
 SIDE EFFECTS:
    None
 RESTRICTIONS:
    The dustem idl wrapper must be installed
 PROCEDURE:
    None
 EXAMPLES
    dustem_init
    dir=getenv('DUSTEM_SOFT_DIR')+'/src/dustem3.8_web/'
    st=dustem_read_all(dir)
    dirout=getenv('DUSTEM_DAT')
    dustem_write_all,st,dirout
 MODIFICATION HISTORY:
    Written by J.-Ph. Bernard
    see evolution details on the dustem cvs maintained at CESR
    Contact J.-Ph. Bernard (Jean-Philippe.Bernard@cesr.fr) in case of problems.

(See /Users/jpb/Soft_Librairies/DUSTEM/src/idl/dustem_write_all.pro)