; docformat = 'rst' ; ; NAME: ; cgPS2Raster ; ; PURPOSE: ; The purpose of this program is to convert a PostScript file to a high ; resolution raster file, using the ImageMagick convert command to do the ; conversion. ; ;******************************************************************************************; ; ; ; Copyright (c) 2011, by Fanning Software Consulting, Inc. All rights reserved. ; ; ; ; Redistribution and use in source and binary forms, with or without ; ; modification, are permitted provided that the following conditions are met: ; ; ; ; * Redistributions of source code must retain the above copyright ; ; notice, this list of conditions and the following disclaimer. ; ; * Redistributions in binary form must reproduce the above copyright ; ; notice, this list of conditions and the following disclaimer in the ; ; documentation and/or other materials provided with the distribution. ; ; * Neither the name of Fanning Software Consulting, Inc. nor the names of its ; ; contributors may be used to endorse or promote products derived from this ; ; software without specific prior written permission. ; ; ; ; THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY ; ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT ; ; SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, ; ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED ; ; TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************************; ; ;+ ; The purpose of this program is to convert a PostScript file to a high ; resolution raster file, using the ImageMagick convert command to do the ; conversion. `ImageMagick ` must ; be installed on your computer. ; ; Note that one restriction the ImageMagick convert command imposes is that it ; cannot convert encapsulated PostScript files that are in landscape mode to ; raster files. These raster files will be clipped at one end of the file. If you ; wish to do the conversion properly, make sure encapsulated landscape plots are ; in portrait mode. ; ; The program requires the `Coyote Library ` ; to be installed on your machine. ; ; :Categories: ; Utilities, Graphics ; ; :Params: ; ps_filename: in, required, type=string ; The name of the input PostScript file that is being converted to a raster file. ; If not provided, the user will be asked to select a file. ; raster_filename: in, required, type=string ; The name of the output raster file that is being converted from the PostScript file. ; If not provided, the output filename is created from the input PostScript file name. ; Note, this is the preferred way to create the output filename, since the OUTPUTNAME ; keyword has been depreciated as an input keyword. ; ; :Keywords: ; allow_transparent: in, optional, type=boolean, default=0 ; To make the background of some image files white, rather than transparent, ; you have to set the "-alpha off" string in the ImageMagick call. This ; string is automatically added to the ImageMagick call unless this keyword ; is set, in which case the string is not added and the image background will ; be transparent. ; bmp: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a BMP image. Requires ImageMagick. ; delete_ps: in, optional, type=boolean, default=0 ; Setting this keyword will delete the PostScript file that is used as the intermediate ; file in the conversion to other file types. ; density: in, optional, type=integer, default=300 ; The horizontal and vertical density (in dots per inch, DPI) of the image when the PostScript file ; is converted to a raster format by ImageMagick. ; filetype: in, optional, type='string', default="" ; This keyword provides a generic way of setting the `BMP`, `GIF`, `JPEG`, `PNG`, and `TIFF` ; keywords. Set this keyword to the type of file output desired, and the correct "output" ; keyword will be set. ; gif: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a GIF image. Requires ImageMagick. ; im_options: in, optional, type=string, default="" ; A string of ImageMagick "convert" options that can be passed to the ImageMagick convert ; command. No error checking occurs with this string. ; jpeg: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a JPEG image. Requires ImageMagick. ; outfilename: out, optional, type=string ; On exit, the name of the output file that was created. ; pdf: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a PDF file. Requires Ghostscript. ; png: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a PNG image. Requires ImageMagick. ; portrait: in, optional, type=boolean, default=0 ; Set this keyword to indicate the PostScript file is in portrait mode. Otherwise, landscape ; mode is assumed. ; resize: in, optional, type=integer, default=25 ; If an image is being created from the PostScript file, it is often resized by some ; amount. You can use this keyword to change the value (e.g, RESIZE=100). ; The value is passed on to resize argument as a percentage in the ImageMagick call. ; showcmd: in, optional, type=boolean, default=0 ; Set this command to show the command used to do any PostScript coversions. ; silent: in, optional, type=boolean, default=0 ; Set this keyword to suppress output from the file. Is this keyword is set, be ; sure to check the `Success` keyword on exit. ; success: out, optional, type=boolean ; On exit, this keyword is set to 1 if the program successfully managed to create a ; raster file. It will be set to 0 otherwise. ; tiff: in, optional, type=boolean, default=0 ; Set this keyword to convert the PostScript output file to a TIFF image. Requires ImageMagick. ; width: in, optional, type=integer ; Set this keyword to set the resulting width of the raster file. The height of the ; raster will be such as to preserve the aspect ratio of the starting image. ; ; :Examples: ; To create a line plot in a PostScript file named lineplot.ps and ; also create a PNG file named lineplot.png for display in a browser, ; type these commands:: ; ; cgPS_Open, FILENAME='lineplot.ps' ; cgPlot, Findgen(11), COLOR='navy', /NODATA, XTITLE='Time', YTITLE='Signal' ; cgPlot, Findgen(11), COLOR='indian red', /OVERPLOT ; cgPlot, Findgen(11), COLOR='olive', PSYM=2, /OVERPLOT ; cgPS_Close, /PNG ; ; :Author: ; FANNING SOFTWARE CONSULTING:: ; David W. Fanning ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: david@idlcoyote.com ; Coyote's Guide to IDL Programming: http://www.idlcoyote.com ; ; :History: ; Change History:: ; Written by: David W. Fanning, 12 December 2011 ; Added the ability to check to see if 8-bit or 24-bit PNG files should be created. 3 April 2012. DWF. ; Modified the ImageMagick commands that resizes the image to a particular width. Necessary ; to accommodate PNG8 file output. Using ImageMagick 6.7.2-9. 4 April 2012. DWF. ; Added FILETYPE keyword. 13 October 2012. DWF. ; Apparently Macs can't handle the version number, so I have removed the version number ; check for Macs. 13 October 2012. DWF. ; Worked on getting the WIDTH keyword to work correctly with Portrait mode files. 19 February 2013. DWF. ; Added the ability to set the number of bits per channel with TIFF files with the IM_TIFF_DEPTH ; keyword in cgWindow_SetDefs, and changed the default number of bits to 8 per channel ; from the previous 16. 14 May 2013. DWF. ; ; :Copyright: ; Copyright (c) 2011, Fanning Software Consulting, Inc. ;- PRO cgPS2Raster, ps_filename, raster_filename, $ ALLOW_TRANSPARENT=allow_transparent, $ BMP=bmp, $ DELETE_PS=delete_ps, $ DENSITY=density, $ IM_OPTIONS=im_options, $ FILETYPE=filetype, $ GIF=gif, $ JPEG=jpeg, $ OUTFILENAME=outfilename, $ PDF=pdf, $ PNG=png, $ PORTRAIT=portrait, $ RESIZE=resize, $ SHOWCMD=showcmd, $ SILENT=silent, $ SUCCESS=success, $ TIFF=tiff, $ WIDTH=width Compile_Opt idl2 ; Error handling. Catch, theError IF theError NE 0 THEN BEGIN Catch, /CANCEL IF ~Keyword_Set(silent) THEN void = cgErrorMsg() success = 0 RETURN ENDIF ; Assume failure. Sigh... success = 0 ; Need a file? IF N_Elements(ps_filename) EQ 0 THEN BEGIN ps_filename = cgPickfile(Filter=['*.ps','*.eps'], Title='Select a PostScript file.') IF ps_filename EQ "" THEN RETURN ENDIF ; ImageMagick parameters. Assume we will convert to PNG file, unless told otherwise IF Total( Keyword_Set(bmp) + Keyword_Set(gif) + Keyword_Set(pdf) + Keyword_Set(png) + $ Keyword_Set(jpeg) + Keyword_Set(tiff) ) EQ 0 THEN png = 1 IF N_Elements(filetype) EQ 0 THEN filetype = "" CASE StrUpCase(filetype) OF 'BMP': bmp = 1 'GIF': gif = 1 'PDF': pdf = 1 'PNG': png = 1 'JPEG': jpeg = 1 'JPG': jpeg = 1 'TIFF': tiff = 1 'TIF': tiff = 1 "": ELSE: BEGIN void = Dialog_Message('File type ' + StrUpCase(filetype) + ' invalid. No raster created.') success = 0 RETURN END ENDCASE IF Keyword_Set(pdf) THEN filetype = 'PDF' IF Keyword_Set(bmp) THEN filetype = 'BMP' IF Keyword_Set(gif) THEN filetype = 'GIF' IF Keyword_Set(png) THEN filetype = 'PNG' IF Keyword_Set(jpeg) THEN filetype = 'JPEG' IF Keyword_Set(tiff) THEN filetype = 'TIFF' SetDefaultValue, allow_transparent, 0, /BOOLEAN SetDefaultValue, density, 300 SetDefaultValue, portrait, 0, /BOOLEAN SetDefaultValue, resize, 25 SetDefaultValue, showcmd, 0, /BOOLEAN SetDefaultValue, silent, 0, /BOOLEAN SetDefaultValue, width, 0 IF portrait THEN BEGIN xsize = 11 ysize = 8.5 ENDIF ELSE BEGIN xsize = 8.5 ysize = 11 ENDELSE ; Construct an output filename, if needed. First, look to see if the raster_filename ; positional parameter is being used to specify the output filename. IF (N_Elements(raster_filename) NE 0) && (N_Elements(outfilename) EQ 0) THEN BEGIN outfilename = raster_filename ENDIF basename = cgRootName(ps_filename, DIRECTORY=theDir, EXTENSION=theExtension) IF theDir EQ "" THEN CD, CURRENT=theDir IF N_Elements(outfilename) EQ 0 THEN BEGIN CASE 1 OF filetype EQ 'BMP': outfilename = Filepath(ROOT_DIR=theDir, basename + '.bmp') filetype EQ 'GIF': outfilename = Filepath(ROOT_DIR=theDir, basename + '.gif') filetype EQ 'JPEG': outfilename = Filepath(ROOT_DIR=theDir, basename + '.jpg') filetype EQ 'PDF': outfilename = Filepath(ROOT_DIR=theDir, basename + '.pdf') filetype EQ 'PNG': outfilename = Filepath(ROOT_DIR=theDir, basename + '.png') filetype EQ 'TIFF': outfilename = Filepath(ROOT_DIR=theDir, basename + '.tif') ENDCASE ENDIF ; Make sure the outfilename is an absolute file path. IF File_BaseName(outfilename) EQ outfilename THEN outfilename = Filepath(ROOT_DIR=theDir, outfilename) ; If you have an output filename, then do it. IF N_Elements(outfilename) NE "" THEN BEGIN ; PDF files handled a bit differently. IF filetype EQ 'PDF' THEN BEGIN cgPS2PDF, ps_filename, outfilename, DELETE_PS=delete_ps, SHOWCMD=showcmd, $ SILENT=silent, SUCCESS=success RETURN ENDIF ; ImageMagick is required for this section of the code. IF StrUpCase(!Version.OS) EQ 'DARWIN' THEN BEGIN available = cgHasImageMagick() doVersionTest = 0 ENDIF ELSE BEGIN available = cgHasImageMagick(Version=version) doVersionTest = 1 ENDELSE IF available THEN BEGIN ; Some functionality depends on the ImageMagick version. Check the version here. IF doVersionTest THEN BEGIN vp = StrSplit(version, '.', /EXTRACT) vp[2] = StrMid(vp[2],0,1) version_number = Fix(vp[0]) * 100 + Fix(vp[1])*10 + vp[2] IF version_number GT 634 THEN allowAlphaCmd = 1 ELSE allowAlphaCmd = 0 ENDIF ELSE allowAlphaCmd = 1 ; Set up for various ImageMagick convert options. IF allowAlphaCmd THEN alpha_cmd = allow_transparent ? '' : ' -alpha off' density_cmd = ' -density ' + StrTrim(density,2) ; Normally, we just resize by a precentage, unless a specific width ; has been specified. IF (N_Elements(width) EQ 0) || (width LE 0) THEN BEGIN resize_cmd = ' -resize '+ StrCompress(resize, /REMOVE_ALL)+'%' ENDIF ELSE BEGIN ; Getting the width correct has to be done in an extremely non-intuitive way. ; I wonder if this will be changed in different versions of ImageMagick? IF portrait THEN BEGIN height = Ceil(Float(xsize)*width/ysize) resize_cmd = ' -resize ' + StrCompress(width, /REMOVE_ALL) + 'x' + StrCompress(height, /REMOVE_ALL) ENDIF ELSE BEGIN height = Ceil(width*ysize/Float(xsize)) resize_cmd = ' -resize ' + StrCompress(height, /REMOVE_ALL) + 'x' + StrCompress(width, /REMOVE_ALL) ENDELSE ENDELSE ; Start ImageMagick convert command. cmd = 'convert' ; Add various command options. IF N_Elements(alpha_cmd) NE 0 THEN cmd = cmd + alpha_cmd IF N_Elements(density_cmd) NE 0 THEN cmd = cmd + density_cmd ; Add the input filename. cmd = cmd + ' "' + ps_filename + '"' IF N_Elements(resize_cmd) NE 0 THEN cmd = cmd + resize_cmd cmd = cmd + ' -flatten ' IF N_Elements(im_options) NE 0 THEN BEGIN IF StrMid(im_options, 0, 1) NE " " THEN im_options = " " + im_options cmd = cmd + im_options ENDIF ; For TIFF files, we are setting the number of bits per channel. ; The values 8, 16, and 32 are allowed. IF Keyword_Set(tiff) THEN BEGIN cgWindow_GetDefs, IM_TIFF_DEPTH=im_tiff_depth choices = [8,16,32] void = Where(choices EQ im_tiff_depth, count) IF count NE 1 THEN BEGIN Message, 'Unable to create TIFF file with ' + $ StrTrim(im_tiff_depth,2) + ' bits per channel. Using 8.', /Informational im_tiff_depth = 8 ENDIF cmd = cmd + ' -depth ' + StrTrim(im_tiff_depth,2) + ' ' ENDIF ; If in landscape mode, rotate by 90 to allow the ; resulting file to be in landscape mode. IF (1-portrait) THEN cmd = cmd + ' -rotate 90' ; Add the output filename and check for PNG output. IF Keyword_Set(png) THEN BEGIN ; Check to see whether 8-bit or 24-bit PNG files should be created. cgWindow_GetDefs, IM_PNG8=png8 IF png8 THEN BEGIN cmd = cmd + ' "' + 'PNG8:' +outfilename + '"' ENDIF ELSE BEGIN cmd = cmd + ' "' + 'PNG24:' +outfilename + '"' ENDELSE ENDIF ELSE cmd = cmd + ' "' + outfilename + '"' IF ~silent THEN BEGIN IF showcmd THEN Print, 'ImageMagick CONVERT command: ', cmd ENDIF ; Execute the spawned command. SPAWN, cmd, result, err_result IF ~silent THEN BEGIN IF err_result[0] NE "" THEN BEGIN FOR k=0,N_Elements(err_result)-1 DO Print, err_result[k] ENDIF ELSE Print, 'Output file located here: ' + outfilename ENDIF ; Have you been asked to delete the PostScript file? IF Keyword_Set(delete_ps) THEN BEGIN IF outfilename NE ps_filename THEN File_Delete, ps_filename ENDIF ENDIF ELSE Message, 'ImageMagick cannot be found on this machine.' ENDIF END