; docformat = 'rst' ; ; NAME: ; cgContour ; ; PURPOSE: ; The purpose of cgContour is to create a wrapper for the traditional IDL graphics ; command, Contour. The Contour command has a number of deficiencies that make it ; difficult to use in a modern computing environment. cgContour corrects these ; deficiencies and allows the user to produce traditional contour plots in a device ; and machine independent manner. ; ;******************************************************************************************; ; ; ; Copyright (c) 2010, by Fanning Software Consulting, Inc. All rights reserved. ; ; ; ; Redistribution and use in source and binary forms, with or without ; ; modification, are permitted provided that the following conditions are met: ; ; ; ; * Redistributions of source code must retain the above copyright ; ; notice, this list of conditions and the following disclaimer. ; ; * Redistributions in binary form must reproduce the above copyright ; ; notice, this list of conditions and the following disclaimer in the ; ; documentation and/or other materials provided with the distribution. ; ; * Neither the name of Fanning Software Consulting, Inc. nor the names of its ; ; contributors may be used to endorse or promote products derived from this ; ; software without specific prior written permission. ; ; ; ; THIS SOFTWARE IS PROVIDED BY FANNING SOFTWARE CONSULTING, INC. ''AS IS'' AND ANY ; ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ; ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT ; ; SHALL FANNING SOFTWARE CONSULTING, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, ; ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED ; ; TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;******************************************************************************************; ; ;+ ; The purpose of cgContour is to create a wrapper for the traditional IDL graphics ; command, Contour. The Contour command has a number of deficiencies that make it ; difficult to use in a modern computing environment. cgContour corrects these ; deficiencies and allows the user to produce traditional contour plots in a device ; and machine independent manner. ; ; .. image:: cgcontour.png ; ; The program requires the `Coyote Library ` ; to be installed on your machine. ; ; :Categories: ; Graphics ; ; :Params: ; data: in, required, type=any ; A one- or two-dimensional array containing the values that make ; up the contour surface. ; x: in, optional, type=any ; A vector or two-dimensional array specifying the X coordinates for ; the contour surface. ; y: in, optional, type=any ; A vector or two-dimensional array specifying the Y coordinates for ; the contour surface. ; ; :Keywords: ; addcmd: in, optional, type=boolean, default=0 ; Set this keyword to add the command to an cgWindow. Setting this keyword ; automatically sets the WINDOW keyword, but the command does not erase the ; graphics window as it would normally. ; aspect: in, optional, type=float, default=none ; Set this keyword to a floating point ratio that represents the aspect ratio ; (ysize/xsize) of the resulting plot. The plot position may change as a result ; of setting this keyword. Note that `Aspect` cannot be used when plotting with ; !P.MULTI. ; axiscolor: in, optional, type=string/integer, default='opposite' ; If this keyword is a string, the name of the axis color. ; Otherwise, the keyword is assumed to be a color index into the current color table. ; axescolor: in, optional, type=string/integer ; Provisions for bad spellers. ; background: in, optional, type=string/integer, default='background' ; If this keyword is a string, the name of the background color. ; Otherwise, the keyword is assumed to be a color index into the current color table. ; c_annotation: in, optional, type=string ; The label to be drawn on each contour. Normally contours are labeled with their ; value. This vector of strings may substitute for those values. ; c_colors: in, optional, type=integer/string vector ; Set to the index values of the contour colors or to named colors. Must contain ; the same number of colors as the number of requested contour levels. ; c_labels: in, optional, type=integer ; A vector that specifies which contour levels to label. If used, the LABEL ; keyword is ignored. ; c_charsize: in, optional, type=float ; The character size of the annotations used on the contour lines themselves. ; By default, 75% of `Charsize`. ; cell_fill: in, optional, type=boolean, default=0 ; Set to indicate filled contours should be created using the "cell fill" method. ; This keyword should always be set if displaying filled contours on map projections ; or if missing data is present in the data you are contouring. ; charsize: in, optional, type=float, default=cgDefCharSize() ; The character size for axes annotations. Uses cgDefCharSize to select default ; character size, unless !P.Charsize is set, in which case !P.Charsize is always used. ; color: in, optional, type=string/integer, default='black' ; If this keyword is a string, the name of the data color. By default, same as AXISCOLOR. ; Otherwise, the keyword is assumed to be a color index into the current color table. ; font: in, optional, type=integer, default=!P.Font ; The type of font desired for axis annotation. ; fill: in, optional, type=boolean, default=0 ; Set to indicate filled contours should be created. ; isotropic: in, optional, type=boolean, default=0 ; Set this keyword to set the `Aspect` keyword to the plot aspect ratio that preserves ; identical scaling for the X and Y axes. This keyword cannot be used with multiple ; contour plots on the page. ; irregular: in, optional, type=boolean ; If this keyword is set, the data, x, and y input parameters are taken to be ; irregularly gridded data, the the data is gridded for use in the contour plot ; using the Triangulate and Trigrid method. The resolution of the gridded output ; is set by the RESOLUTION keyword. ; label: in, optional, type=integer, default=1 ; An number that tells how to label contour levels. A 0 means ; no contour levels are labelled. A 1 (the default) means all contour levels are ; labelled. A 2 means label every 2nd contour level is labelled. A 3 means every ; 3rd contour level is labelled, and so on. ; layout: in, optional, type=intarr(3) ; This keyword specifies a grid with a graphics window and determines where the ; graphic should appear. The syntax of LAYOUT is three numbers: [ncolumns, nrows, location]. ; The grid is determined by the number of columns (ncolumns) by the number of ; rows (nrows). The location of the graphic is determined by the third number. The ; grid numbering starts in the upper left (1) and goes sequentually by column and then ; by row. ; levels: in, optional, type=any ; A vector of data levels to contour. If used, NLEVELS is ignored. If missing, ; NLEVELS is used to construct N equally-spaced contour levels. ; map_object: in, optional, type=object ; If you are overplotting (OVERPLOT=1) on a map projection set up with Map_Proj_Init ; and using projected meter space, rather than lat/lon space, then you can use this ; keyword to provide a cgMap object that will allow you to convert the `x` and `y` ; grid parameters from longitude and latitude, respectively, to projected meter space ; before the contour is displayed. Note, you MUST pass the `x` and `y` grid parameters ; to cgContour if you are overplotting on a map projection. There is no checking to ; be sure these parameters are in the correct longitude and latitude range, respectively. ; missingvalue: in, optional, type=any ; Use this keyword to identify any missing data in the input data values. ; noclip: in, optional, type=boolean, default=0 ; Normally, the plot is clipped to the axes boundaries. Setting this keyword prevents ; such clipping. Normally, this keyword is only used when there is a problem displaying ; contour plots in 3D space. ; nlevels: in, optional, type=integer, default=6 ; If the Contour plot LEVELS keyword is not used, this keyword will produce this ; number of equally spaced contour intervals. Unlike the Contour NLEVELS keyword, ; this keyword actually works! ; noerase: in, optional, type=boolean, default=0 ; Set this keyword to prevent the window from erasing the contents before displaying ; the contour plot. ; olevels: out, optional ; Set to a named variable to return the actual contour levels used in the program. ; Unfortunately, output variables cannot be returned if the cgContour command is ; being executed in a cgWindow. ; onimage: in, optional, type=boolean, default=0 ; If this keyword is set, and an image has been display previously with cgImage, ; then the contour plot will determine the location of the image in the display ; window and overplot itself onto that image. ; outcolor: in, optional, type=string, default='charcoal' ; The color of the contour lines when the `Outline` keyword is used. ; outfilename: in, optional, type=string ; If the `Output` keyword is set, the user will be asked to supply an output ; filename, unless this keyword is set to a non-null string. In that case, the ; value of this keyword will be used as the filename and there will be no dialog ; presented to the user. ; outline: in, optional, type=boolean, default=0 ; This keyword applies only if the `Fill` keyword is set. It will draw the ; contour lines on top of the filled contour. It draws the outline in the `OutColor`. ; output: in, optional, type=string, default="" ; Set this keyword to the type of output desired. Possible values are these:: ; ; 'PS' - PostScript file ; 'EPS' - Encapsulated PostScript file ; 'PDF' - PDF file ; 'BMP' - BMP raster file ; 'GIF' - GIF raster file ; 'JPEG' - JPEG raster file ; 'PNG' - PNG raster file ; 'TIFF' - TIFF raster file ; ; Or, you can simply set this keyword to the name of the output file, and the type of ; file desired will be determined by the file extension. If you use this option, the ; user will not be prompted to supply the name of the output file. ; ; All raster file output is created through PostScript intermediate files (the ; PostScript files will be deleted), so ImageMagick and Ghostview MUST be installed ; to produce anything other than PostScript output. (See cgPS2PDF and cgPS_Close for ; details.) And also note that you should NOT use this keyword when doing multiple ; plots. The keyword is to be used as a convenient way to get PostScript or raster ; output for a single graphics command. Output parameters can be set with cgWindow_SetDefs. ; overplot: in, optional, type=boolean, default=0 ; Set this keyword to overplot the contours onto a previously established ; data coordinate system. ; palette: in, optional, type=byte ; A (256x3) color palette containing the RGB color vectors to use for coloring contours. ; Contour colors will be sampled from the color table palette into the number ; of contour levels required. If the palette is NOT 256 elements in length, then ; it is assumed that the length corresponds to the number of levels to be contoured. ; position: in, optional, type=float ; Set this keyword to a four-element [x0,y0,x1,y1] array giving the contour plot ; position in normalized coordinates. ; resolution: in, optional, type=integer array, default=[41\,41] ; If the IRREGULAR keyword is set, this keyword specifies the X and Y resolution ; in a two element integer array of the final gridded data that is sent to the ; contour plot. ; t3d: in, optional, type=boolean, default=0 ; Set this keyword to use the 3D axis rotation matrix in !P.T3D. ; title: in, optional, type=string ; Set this keyword to the title of the plot. ; traditional: in, optional, type=boolean, default=0 ; If this keyword is set, the traditional color scheme of a black background for ; graphics windows on the display is used and PostScript files always use a white background. ; window: in, optional, type=boolean, default=0 ; Set this keyword to replace all the commands in the current cgWindow or to ; create a new cgWindow, if one doesn't currenly exist, for displaying this command. ; To create a new cgWindow if one currenly exists, use the `cgWindow` command ; xstyle: in, optional, type=integer, default=1 ; If unused in the program, set to 1 to force exact axis scaling. ; xthick: in, optional, type=integer, default=1 ; The thickness of the X axis annotations. ; xticklen: in, optional, type=float, default=0.025 ; The length of the X tick marks. Set to a negative value to create outward ; facing tick marks. ; xticks: in, optional, type=integer ; The number of tick intervals on the X axis. ; xtickv: in, optional, type=string ; A vector of tick values to use with the tick marks. See IDL documentation for ; graphics keywords for additional information. ; xtitle: in, optional, type=string ; Set this keyword to the X title of the plot. ; ystyle: in, optional, type=integer, default=1 ; If unused in the program, set to 1 to force exact axis scaling. ; ythick: in, optional, type=integer, default=1 ; The thickness of the Y axis annotations. ; yticklen: in, optional, type=float, default=0.025 ; The length of the Y tick marks. Set to a negative value to create outward ; facing tick marks. ; yticks: in, optional, type=integer ; The number of tick intervals on the Y axis. ; ytickv: in, optional, type=string ; A vector of tick values to use with the tick marks. See IDL documentation for ; graphics keywords for additional information. ; ytitle: in, optional, type=string ; Set this keyword to the Y title of the plot. ; _ref_extra: in, optional, type=any ; Any keyword appropriate for the `IDL Contour command ` ; is allowed in the program. ; ; :Examples: ; Use as you would use the IDL CONTOUR command:: ; data = dist(51) ; cgContour, data ; LoadCT, 33 ; cgContour, data, /FILL ; cgContour, data, /OVERPLOT ; ; If you wish to overplot on top of an image, use the ONIMAGE keyword, rather ; than the OVERPLOT keyword: ; cgImage, data, /SCALE, XRANGE=[-10, 10], YRANGE=[-5,5], /AXES ; cgContour, data, /ONIMAGE ; ; ; See `Device Independent Contour Plots ` ; for additional examples. ; ; :Author: ; FANNING SOFTWARE CONSULTING:: ; David W. Fanning ; 1645 Sheely Drive ; Fort Collins, CO 80526 USA ; Phone: 970-221-0438 ; E-mail: david@idlcoyote.com ; Coyote's Guide to IDL Programming: http://www.idlcoyote.com ; ; :History: ; Change History:: ; Written, 11 November 2010. DWF. ; Restored the CELL_FILL keyword, which had been accidentally removed in ; the earlier version. 12 November 2010. DWF. ; Add the ability to specify the contour colors as color names. 16 November 2010. DWF. ; Now setting decomposition state by calling cgSetColorState. 16 November 2010. DWF. ; Final color table restoration skipped in Z-graphics buffer. 17 November 2010. DWF. ; Background keyword now applies in PostScript file as well. 17 November 2010. DWF. ; Many changes after BACKGROUND changes to get !P.MULTI working again! 18 November 2010. DWF. ; Fixed a small problem with the OVERPLOT keyword. 18 Nov 2010. DWF. ; Changes so that color variables don't change type. 23 Nov 2010. DWF. ; Added WINDOW keyword to allow graphic to be displayed in a resizable graphics window. 8 Dec 2010. DWF ; Modifications to allow cgContour to be drop-in replacement for old Contour commands in ; indexed color mode. 24 Dec 2010. DWF. ; Previous changes introduced problems with OVERPLOT that have now been fixed. 28 Dec 2010. DWF. ; Set NOERASE keyword from !P.NoErase system variable when appropriate. 28 Dec 2010. DWF. ; Additional problems with NOERASE discovered and solved. 29 Dec 2010. DWF. ; Change to DECOMPOSED color was using incorrect color tables. 29 Dec 2010. DWF. ; In some cases, I was turning BYTE values to strings without converting to ; INTEGERS first. 30 Dec 2010. DWF. ; Still working on getting contour colors to work in decomposed color mode in all ; circumstances. 2 Jan 2011. DWF. ; Fixed problem with FILL when no contour colors (C_COLORS) are specified. 3 Jan 2011. DWF. ; Fixed a problem that preventing output keyword (e.g., PATH_INFO) from being returned properly. ; 3 Jan 2011. DWF. ; Fixed a problem calculating NLEVELS when LEVELS keyword was used instead. 3 Jan 2011. DWF. ; TVLCT commands protected from NULL device. 4 Jan 2011. DWF. ; Fixed a no color problem when CELL_FILL was set. 11 Jan 2011. DWF. ; Fixed a problem with overlaying filled contours with /OVERPLOT. 11 Jan 2011. DWF. ; Selecting character size now with cgDefCharSize. 11 Jan 2011. DWF. ; Moved setting to decomposed color before color selection process to avoid PostScript ; background problems when passed 24-bit color integers. 12 Jan 2011. DWF. ; Fixed a problem in which I assumed the background color was a string. 18 Jan 2011. DWF. ; Added ADDCMD keyword. 26 Jan 2011. DWF. ; Added LAYOUT keyword. 28 Jan 2011. DWF. ; Added PALETTE keyword. 4 Feb 2011. DWF. ; Color table vectors must be obtained AFTER loading the color palette. 6 March 2011. DWF. ; Modified error handler to restore the entry decomposition state if there is an error. 17 March 2011. DWF ; Modifications to allow palettes of less than 256 elememts in length to be used. 1 April 2011. DWF. ; Modifications to repair axes and tickmarks when creating filled contour plots. 28 May 2011. DWF. ; Whoops! Last fix shouldn't apply to OVERPLOTTING. Fixed. 22 June 2011. DWF. ; Still more work to get axes overplotting to work correct. 5 July 2011. DWF. ; Added an ONIMAGE keyword that allows the contours to be overplotted on top of an image that ; has been displayed with cgImage. This requires that the SAVE keyword is set in the ; cgImage call. ; Improved error handling. 26 Aug 2011. DWF. ; Got the data type correct in the part of the code that creates levels. 6 Sept 2011. DWF. ; Small change to allow cgWindow to set the current graphics window if it is the only ; window on the display. 15 Sept 2011. DWF. ; Had to add XTICKV, YTICKV, XTICKS, and YTICKS keywords to get repaired axes to work ; properly on filled contour plots. There may be other keywords needed, but I am ; going to add them on an as-needed basis. 30 Sept 2011. DWF. ; Other keywords WERE needed! I added XTICKLEN and YTICKLEN keywords to the repaired axes ; code. 3 Oct 2011. DWF. ; Change from 15 Sept 2011 forgot to include the possibility of pixmap windows. Algorithm ; made more robust. 27 Oct 2011. DWF. ; There was a problem with axes when plotting contours in 3D that has been fixed. 18 Nov 2011. DWF. ; Added OLEVELS keyword. 7 Dec 2011. DWF. ; Added OUTLINE and OUTCOLOR keywords. 8 Dec 2011. DWF. ; Modified the way the axes are drawn when given a negative tick length. 9 Dec 2011. DWF. ; Added the ability to send the output directly to a file via the OUTPUT keyword. 9 Dec 2011, DWF. ; PostScript, PDF, and Imagemagick parameters can now be tailored with cgWindow_SetDefs. 14 Dec 2001. DWF. ; Made sure the OUTLINE keyword works with CELL_FILL, too. 16 Dec 2011. DWF. ; Modified to use cgDefaultColor for default color selection. 24 Dec 2011. DWF. ; Added MAP_OBJECT keyword. 28 Dec 2011. DWF. ; Changes to allow better default colors, based on changes to cgColor and cgDefaultColor. 1 Feb 2012. DWF. ; Axis repair for filled contour plots (done with AXIS) results in incorrect tick labeling with ; date/time axes. Replaced repair code with actual Contour command. 9 March 2012. DWF. ; Fixed a problem with color palettes by defining NLEVELS according to the number of colors ; in the palette. 19 March 2012. DWF. ; Now allowing the user to draw in the "background" color, if the COLOR or AXISCOLOR is "BACKGROUND". 19 March 2012. DWF. ; The axis repair change on 9 March was not working in multi plots because the plot was already ; advanced. Added a fix to make sure the repair is to the correct multi plot. 20 April 2012. DWF. ; Added an ASPECT keyword to maintain the program aspect ratio. 12 July 2012. DWF. ; Added the ability to use escape characters in plot titles to specify cgSymbol symbols. 27 July 2012. DWF. ; Added C_ANNOTATION keyword. 10 Nov 2012. DWF. ; Modified the way default colors are selected when the background color is "white". 4 Dec 2012. DWF. ; Making more effort to set the CELL_FILL keyword instead of FILL if filling contours on maps. 7 Jan 2013. DWF. ; Added C_ORIENTATION and C_SPACING keywords and modified the program to allow line filling. 28 Jan 2013. DWF. ; Added ISOTROPIC keyword. 27 June 2013. DWF. ; ; :Copyright: ; Copyright (c) 2010-2013, Fanning Software Consulting, Inc. ;- PRO cgContour, data, x, y, $ ADDCMD=addcmd, $ ASPECT=aspect, $ AXISCOLOR=saxiscolor, $ AXESCOLOR=saxescolor, $ BACKGROUND=sbackground, $ C_ANNOTATION=c_annotation, $ C_CHARSIZE=c_charsize, $ C_COLORS=c_colors, $ C_LABELS=c_labels, $ C_ORIENTATION=c_orientation, $ C_SPACING=c_spacing, $ CELL_FILL=cell_fill, $ CHARSIZE=charsize, $ COLOR=scolor, $ FILL=fill, $ FONT=font, $ ISOTROPIC=isotropic, $ IRREGULAR=irregular, $ LABEL=label, $ LAYOUT=layout, $ LEVELS=levels, $ NLEVELS=nlevels, $ NOCLIP=noclip, $ NOERASE=noerase, $ MAP_OBJECT=map_object, $ MISSINGVALUE=missingvalue, $ OLEVELS=olevels, $ ONIMAGE=onImage, $ OUTCOLOR=outcolor, $ OUTFILENAME=outfilename, $ OUTLINE=outline, $ OUTPUT=output, $ OVERPLOT=overplot, $ PALETTE=palette, $ POSITION=position, $ RESOLUTION=resolution, $ T3D=t3d, $ TITLE=title, $ TRADITIONAL=traditional, $ WINDOW=window, $ XSTYLE=xstyle, $ XTHICK=xthick, $ XTICKLEN=xticklen, $ XTICKV=xtickv, $ XTICKS=xticks, $ XTITLE=xtitle, $ YSTYLE=ystyle, $ YTHICK=ythick, $ YTICKLEN=yticklen, $ YTICKV=ytickv, $ YTICKS=yticks, $ YTITLE=ytitle, $ ZVALUE=zvalue, $ _REF_EXTRA=extra Compile_Opt idl2 Catch, theError IF theError NE 0 THEN BEGIN Catch, /CANCEL void = cgErrorMsg() IF N_Elements(thisMulti) NE 0 THEN !P.Multi = thisMulti IF (!D.Name NE "NULL") && (N_Elements(rr) NE 0) THEN TVLCT, rr, gg, bb IF N_Elements(currentState) NE 0 THEN cgSetColorState, currentState RETURN ENDIF ; Check parameters. IF N_Elements(data) EQ 0 THEN BEGIN Print, 'USE SYNTAX: cgContour, data, x, y, NLEVELS=10' RETURN ENDIF ; Set up PostScript device for working with colors. IF !D.Name EQ 'PS' THEN Device, COLOR=1, BITS_PER_PIXEL=8 ; Check parameters. IF N_Params() EQ 0 THEN BEGIN Print, 'USE SYNTAX: cgContour, data, x, y' RETURN ENDIF ; Do they want this plot in a resizeable graphics window? IF Keyword_Set(addcmd) THEN window = 1 IF Keyword_Set(window) AND ((!D.Flags AND 256) NE 0) THEN BEGIN ; If you are using a layout, you can't ever erase. IF N_Elements(layout) NE 0 THEN noerase = 1 IF Keyword_Set(overplot) OR Keyword_Set(addcmd) THEN BEGIN cgWindow, 'cgContour', data, x, y, $ ASPECT=aspect, $ AXISCOLOR=saxiscolor, $ AXESCOLOR=saxescolor, $ BACKGROUND=sbackground, $ C_ANNOTATION=c_annotation, $ C_CHARSIZE=c_charsize, $ C_COLORS=c_colors, $ C_LABELS=c_labels, $ C_ORIENTATION=c_orientation, $ C_SPACING=c_spacing, $ CELL_FILL=cell_fill, $ CHARSIZE=charsize, $ COLOR=scolor, $ FONT=font, $ FILL=fill, $ ISOTROPIC=isotropic, $ IRREGULAR=irregular, $ LABEL=label, $ LAYOUT=layout, $ LEVELS=levels, $ NLEVELS=nlevels, $ NOCLIP=noclip, $ NOERASE=noerase, $ MAP_OBJECT=map_object, $ MISSINGVALUE=missingvalue, $ OLEVELS=olevels, $ ONIMAGE=onimage, $ OUTCOLOR=outcolor, $ OUTLINE=outline, $ OVERPLOT=overplot, $ PALETTE=palette, $ POSITION=position, $ RESOLUTION=resolution, $ T3D=t3d, $ TITLE=title, $ TRADITIONAL=traditional, $ XSTYLE=xstyle, $ XTHICK=xthick, $ XTICKLEN=xticklen, $ XTICKV=xtickv, $ XTICKS=xticks, $ XTITLE=xtitle, $ YSTYLE=ystyle, $ YTHICK=ythick, $ YTICKLEN=yticklen, $ YTICKV=ytickv, $ YTICKS=yticks, $ YTITLE=ytitle, $ ZVALUE=zvalue, $ ADDCMD=1, $ _Extra=extra RETURN ENDIF currentWindow = cgQuery(/CURRENT, COUNT=wincnt) IF wincnt EQ 0 THEN replaceCmd = 0 ELSE replaceCmd=1 cgWindow, 'cgContour', data, x, y, $ ASPECT=aspect, $ AXISCOLOR=saxiscolor, $ AXESCOLOR=saxescolor, $ BACKGROUND=sbackground, $ C_ANNOTATION=c_annotation, $ C_CHARSIZE=c_charsize, $ C_COLORS=c_colors, $ C_LABELS=c_labels, $ C_ORIENTATION=c_orientation, $ C_SPACING=c_spacing, $ CELL_FILL=cell_fill, $ CHARSIZE=charsize, $ COLOR=scolor, $ FONT=font, $ FILL=fill, $ ISOTROPIC=isotropic, $ IRREGULAR=irregular, $ LABEL=label, $ LAYOUT=layout, $ LEVELS=levels, $ NLEVELS=nlevels, $ NOCLIP=noclip, $ NOERASE=noerase, $ MAP_OBJECT=map_object, $ MISSINGVALUE=missingvalue, $ OLEVELS=olevels, $ ONIMAGE=onimage, $ OUTCOLOR=outcolor, $ OUTLINE=outline, $ OVERPLOT=overplot, $ PALETTE=palette, $ POSITION=position, $ RESOLUTION=resolution, $ T3D=t3d, $ TITLE=title, $ TRADITIONAL=traditional, $ XSTYLE=xstyle, $ XTHICK=xthick, $ XTICKLEN=xticklen, $ XTICKV=xtickv, $ XTICKS=xticks, $ XTITLE=xtitle, $ YSTYLE=ystyle, $ YTHICK=ythick, $ YTICKLEN=yticklen, $ YTICKV=ytickv, $ YTICKS=yticks, $ YTITLE=ytitle, $ ZVALUE=zvalue, $ REPLACECMD=replaceCmd, $ _Extra=extra RETURN ENDIF ; Are we doing some kind of output? IF (N_Elements(output) NE 0) && (output NE "") THEN BEGIN ; If the output string has a dot character, then this must be a ; filename, and we will determine the type of file from the filename extension. IF StrPos(output, '.') NE -1 THEN BEGIN root_name = cgRootName(output, DIRECTORY=theDir, EXTENSION=ext) IF theDir EQ "" THEN CD, CURRENT=theDir outfilename = output outputSelection = StrUpCase(ext) ENDIF IF N_Elements(outputSelection) EQ 0 THEN outputSelection = StrUpCase(output) typeOfOutput = ['PS','EPS','PDF','BMP','GIF','JPEG','JPG','PNG','TIFF', 'TIF'] void = Where(typeOfOutput EQ outputSelection, count) IF count EQ 0 THEN Message, 'Cannot find ' + outputSelection + ' in allowed output types.' ; Set things up. CASE outputSelection OF 'PS': BEGIN ext = '.ps' delete_ps = 0 END 'EPS': BEGIN ext = '.eps' encapsulated = 1 delete_ps = 0 END 'PDF': BEGIN ext = '.pdf' pdf_flag = 1 delete_ps = 1 END 'BMP': BEGIN ext = '.bmp' bmp_flag = 1 delete_ps = 1 END 'GIF': BEGIN ext = '.gif' gif_flag = 1 delete_ps = 1 END 'JPEG': BEGIN ext = '.jpg' jpeg_flag = 1 delete_ps = 1 END 'JPG': BEGIN ext = '.jpg' jpeg_flag = 1 delete_ps = 1 END 'PNG': BEGIN ext = '.png' png_flag = 1 delete_ps = 1 END 'TIFF': BEGIN ext = '.tif' tiff_flag = 1 delete_ps = 1 END 'TIF': BEGIN ext = '.tif' tiff_flag = 1 delete_ps = 1 END ENDCASE ; Do you need a filename? IF ( (N_Elements(outfilename) EQ 0) || (outfilename EQ "") ) THEN BEGIN filename = 'cgplot' + ext outfilename = cgPickfile(FILE=filename, TITLE='Select Output File Name...', $ FILTER=ext, /WRITE) IF outfilename EQ "" THEN RETURN ENDIF ; We need to know the root name of the file, because we have to make a PostScript ; file of the same name. At least we do if the type is not PS or EPS. IF (outputSelection NE 'PS') && (outputSelection NE 'EPS') THEN BEGIN root_name = cgRootName(outfilename, DIRECTORY=theDir) IF theDir EQ "" THEN CD, CURRENT=theDir ps_filename = Filepath(ROOT_DIR=theDir, root_name + '.ps') ENDIF ELSE ps_filename = outfilename ; Get the output default values. cgWindow_GetDefs, $ PS_Charsize = ps_charsize, $ ; The PostScript character size. PS_FONT = ps_font, $ ; Select the font for PostScript output. PS_Decomposed = ps_decomposed, $ ; Sets the PostScript color mode. PS_Delete = ps_delete, $ ; Delete PS file when making IM raster. PS_Metric = ps_metric, $ ; Select metric measurements in PostScript output. PS_Scale_factor = ps_scale_factor, $ ; Select the scale factor for PostScript output. PS_TT_Font = ps_tt_font ; Select the true-type font to use for PostScript output. ; Set up the PostScript device. cgPS_Open, $ CHARSIZE=ps_charsize, $ DECOMPOSED=ps_decomposed, $ FILENAME=ps_filename, $ FONT=ps_font , $ ENCAPSULATED=encapsulated, $ METRIC=ps_metric, $ SCALE_FACTOR=ps_scale_factor, $ TT_FONT=ps_tt_font, $ QUIET=1 ENDIF ; If you supplied annotation, check it for embedded symbols. IF N_Elements(c_annotation) NE 0 THEN BEGIN FOR j=0,N_Elements(c_annotation)-1 DO c_annotation[j] = cgCheckForSymbols(c_annotation[j]) ENDIF ; Is the ISOTROPIC keyword set? IF Keyword_Set(isotropic) THEN BEGIN IF N_Elements(x) NE 0 THEN xrange = Max(x, /NaN) - Min(x, /NaN) IF N_Elements(y) NE 0 THEN yrange = Max(y, /NaN) - Min(y, /NaN) dims = Size(data, /Dimensions) IF N_Elements(x) EQ 0 THEN xrange = dims[0] IF N_Elements(y) EQ 0 THEN yrange = dims[1] aspect = Float(yrange) / xrange ENDIF IF (N_Elements(aspect) NE 0) && (Total(!P.MULTI) EQ 0) THEN BEGIN ; If position is set, then fit the plot into those bounds. IF (N_Elements(position) GT 0) THEN BEGIN trial_position = Aspect(aspect, margin=0.) trial_width = trial_position[2]-trial_position[0] trial_height = trial_position[3]-trial_position[1] pos_width = position[2]-position[0] pos_height = position[3]-position[1] ; Same logic as cgImage: try to fit image width, then if you can't get the right aspect ; ratio, fit the image height instead. fit_ratio = pos_width / trial_width IF trial_height * fit_ratio GT pos_height THEN $ fit_ratio = pos_height / trial_height ; new width and height trial_width *= fit_ratio trial_height *= fit_ratio ; calculate position vector based on trial_width and trial_height position[0] += 0.5*(pos_width - trial_width) position[2] -= 0.5*(pos_width - trial_width) position[1] += 0.5*(pos_height - trial_height) position[3] -= 0.5*(pos_height - trial_height) ENDIF ELSE position=Aspect(aspect) ; if position isn't set, just use output of Aspect ENDIF ; If you want to overplot on an image, set the OVERPLOT keyword. IF Keyword_Set(onImage) THEN overplot = 1 ; Going to have to do all of this in decomposed color, if possible. cgSetColorState, 1, CURRENTSTATE=currentState ; If current state is "indexed color" and colors are represented as long integers then "fix" them. IF (currentState EQ 0) THEN BEGIN IF Size(sbackground, /TNAME) EQ 'LONG' THEN sbackground = Fix(sbackground) IF Size(saxiscolor, /TNAME) EQ 'LONG' THEN saxiscolor = Fix(saxiscolor) IF Size(saxescolor, /TNAME) EQ 'LONG' THEN saxescolor = Fix(saxescolor) IF Size(scolor, /TNAME) EQ 'LONG' THEN scolor = Fix(scolor) ENDIF ; Pay attention to !P.Noerase in setting the NOERASE kewyord. This must be ; done BEFORE checking the LAYOUT properties. IF !P.NoErase NE 0 THEN noerase = !P.NoErase ELSE noerase = Keyword_Set(noerase) ; Set up the layout, if necessary. IF N_Elements(layout) NE 0 THEN BEGIN thisMulti = !P.Multi totalPlots = layout[0]*layout[1] !P.Multi = [0,layout[0], layout[1], 0, 0] IF layout[2] EQ 1 THEN BEGIN noerase = 1 !P.Multi[0] = 0 ENDIF ELSE BEGIN !P.Multi[0] = totalPlots - layout[2] + 1 ENDELSE ENDIF ; Character size has to be determined *after* the layout has been decided. IF N_Elements(font) EQ 0 THEN font = !P.Font IF Keyword_Set(t3d) && (!D.Name EQ 'PS') THEN font = -1 IF N_Elements(title) EQ 0 THEN title = "" ELSE title = cgCheckForSymbols(title) IF N_Elements(xtitle) EQ 0 THEN xtitle = "" ELSE xtitle = cgCheckForSymbols(xtitle) IF N_Elements(ytitle) EQ 0 THEN ytitle = "" ELSE ytitle = cgCheckForSymbols(ytitle) IF N_Elements(charsize) EQ 0 THEN charsize = cgDefCharSize(FONT=font) IF N_Elements(c_charsize) EQ 0 THEN c_charsize = charsize * 0.75 ; Handle data properly. ndims = Size(data, /N_DIMENSIONS) s = Size(data, /DIMENSIONS) CASE ndims OF 1: BEGIN IF N_Elements(x) EQ 0 THEN BEGIN IF Keyword_Set(onImage) THEN BEGIN CASE !X.TYPE OF 0: xgrid = cgScaleVector(Indgen(s[0]), !X.CRange[0], !X.CRange[1]) 1: xgrid = cgScaleVector(Indgen(s[0]), 10^!X.CRange[0], 10^!X.CRange[1]) 3: Message, 'Must supply LONGITUDE vector when overplotting on map projections' ENDCASE ENDIF ELSE BEGIN xgrid = Indgen(s[0]) ENDELSE ENDIF ELSE xgrid = x IF N_Elements(y) EQ 0 THEN BEGIN IF Keyword_Set(onImage) THEN BEGIN CASE !Y.TYPE OF 0: ygrid = cgScaleVector(Indgen(s[1]), !Y.CRange[0], !Y.CRange[1]) 1: ygrid = cgScaleVector(Indgen(s[1]), 10^!Y.CRange[0], 10^!Y.CRange[1]) 3: Message, 'Must supply LATITUDE vector when overplotting on map projections' ENDCASE ENDIF ELSE BEGIN ygrid = Indgen(s[1]) ENDELSE ENDIF ELSE ygrid = y END 2: BEGIN IF N_Elements(x) EQ 0 THEN BEGIN IF Keyword_Set(onImage) THEN BEGIN CASE !X.TYPE OF 0: xgrid = cgScaleVector(Indgen(s[0]), !X.CRange[0], !X.CRange[1]) 1: xgrid = cgScaleVector(Indgen(s[0]), 10^!X.CRange[0], 10^!X.CRange[1]) 3: Message, 'Must supply LONGITUDE vector when overplotting on map projections' ENDCASE ENDIF ELSE BEGIN xgrid = Indgen(s[0]) ENDELSE ENDIF ELSE xgrid = x IF N_Elements(y) EQ 0 THEN BEGIN IF Keyword_Set(onImage) THEN BEGIN CASE !Y.TYPE OF 0: ygrid = cgScaleVector(Indgen(s[1]), !Y.CRange[0], !Y.CRange[1]) 1: ygrid = cgScaleVector(Indgen(s[1]), 10^!Y.CRange[0], 10^!Y.CRange[1]) 3: Message, 'Must supply LATITUDE vector when overplotting on map projections' ENDCASE ENDIF ELSE BEGIN ygrid = Indgen(s[1]) ENDELSE ENDIF ELSE ygrid = y END ELSE: Message, 'Contour data must be 1D or 2D.' ENDCASE ; Get the current color table vectors. The NULL business was put here at ; the request of Wayne Landsman in support of NASA Astronomy Library. It ; is important for programs NASA runs. IF (!D.Name NE 'NULL') THEN BEGIN ; If you have a palette, load the colors now. Otherwise whatever colors ; are in the current color table will be used. If you are using a palette, ; you should NOT use C_COLORS, so I undefine it. IF N_Elements(palette) NE 0 THEN BEGIN IF Size(palette, /N_DIMENSIONS) NE 2 THEN Message, 'Color palette is not a 3xN array.' dims = Size(palette, /DIMENSIONS) threeIndex = Where(dims EQ 3) IF ((threeIndex)[0] LT 0) THEN Message, 'Color palette is not a 3xN array.' IF threeIndex[0] EQ 0 THEN palette = Transpose(palette) TVLCT, p_red, p_grn, p_blu, /Get ; Save the color vectors before loading the palette. TVLCT, palette ; Set up contour colors for the palette. If you passed contour colors, ; then I assume these are indices into the color palette. IF N_Elements(c_colors) NE 0 THEN con_colors = cgColor24(palette[c_colors,*]) ; If the palette contains fewer colors than the color table, then I assume ; the palette is just for contour colors. IF (N_Elements(c_colors) EQ 0) && ((N_Elements(palette)/3) LT 256) THEN BEGIN con_colors = cgColor24(palette) ENDIF ; If the number of contour colors is less than 256, and LEVELS and NLEVELS are ; both undefined, then let's define NLEVELS to be equal to the number of contour ; colors in the color palette. dims = Size(palette, /DIMENSIONS) ; First dimension is now the number of colors. IF (dims[0] LT 256) && (N_Elements(levels) EQ 0) && (N_Elements(nlevels) EQ 0) THEN BEGIN nlevels = dims[0] ENDIF ENDIF ; Get the color table vectors. Must do AFTER loading the palette, or ; PostScript can't be produced properly. TVLCT, rr, gg, bb, /GET ENDIF ; Check the color keywords. background = cgDefaultColor(sbackground, /BACKGROUND, TRADITIONAL=traditional) IF Size(background, /TNAME) EQ 'STRING' && (StrUpCase(background[0]) EQ 'WHITE') THEN BEGIN IF (N_Elements(saxisColor) EQ 0) && (N_Elements(saxesColor) NE 0) THEN saxisColor = saxesColor axisColor = cgDefaultColor(saxisColor, DEFAULT='black', TRADITIONAL=traditional) color = cgDefaultColor(sColor, DEFAULT='black', TRADITIONAL=traditional) ENDIF ELSE BEGIN IF (N_Elements(saxisColor) EQ 0) && (N_Elements(saxesColor) NE 0) THEN saxisColor = saxesColor axisColor = cgDefaultColor(saxisColor, TRADITIONAL=traditional) color = cgDefaultColor(sColor, DEFAULT=axisColor, TRADITIONAL=traditional) ENDELSE ; If color is the same as background, do something. Since this precludes drawing the the ; background color (perhaps you want to "erase" something), I offer an exception. If the ; COLOR is "Background", I am going to assume you know what you are doing! IF ColorsAreIdentical(background, color) THEN BEGIN IF ((!D.Flags AND 256) NE 0) THEN BEGIN IF (!P.Multi[0] EQ 0) && (~Keyword_Set(overplot) && ~noerase) THEN cgErase, background ENDIF IF (Size(color, /TNAME) EQ 'STRING') THEN BEGIN IF (StrUpCase(color) NE 'BACKGROUND') THEN color = 'OPPOSITE' ENDIF ELSE color = 'OPPOSITE' ENDIF IF ColorsAreIdentical(background, axiscolor) THEN BEGIN IF ((!D.Flags AND 256) NE 0) THEN BEGIN IF (!P.Multi[0] EQ 0) && (~Keyword_Set(overplot) && ~noerase) THEN cgErase, background ENDIF IF (Size(axiscolor, /TNAME) EQ 'STRING') THEN BEGIN IF (StrUpCase(axiscolor) NE 'BACKGROUND') THEN axiscolor = 'OPPOSITE' ENDIF ELSE axiscolor = 'OPPOSITE' ENDIF ; Default values for keywords. fill = Keyword_Set(fill) ; Really need CELL_FILL instead of FILL if you are overplotting onto a map projection. IF fill && ((N_Elements(map_object) NE 0) || (!X.Type EQ 3)) && Keyword_Set(overplot) THEN BEGIN fill = 0 cell_fill = 1 ENDIF cell_fill = Keyword_Set(cell_fill) irregular = Keyword_Set(irregular) SetDefaultValue, label, 1 SetDefaultValue, resolution, [41,41] SetDefaultValue, outcolor, 'charcoal' outline = Keyword_Set(outline) IF N_Elements(nlevels) EQ 0 THEN BEGIN IF N_Elements(levels) EQ 0 THEN nlevels = 6 ELSE nlevels = N_Elements(levels) ENDIF t3d = Keyword_Set(t3d) IF t3d THEN BEGIN IF N_Elements(zvalue) EQ 0 THEN zvalue = 0 IF N_Elements(noclip) EQ 0 THEN noclip = 1 ENDIF noclip = Keyword_Set(noclip) SetDefaultValue, xstyle, 1 SetDefaultValue, ystyle, 1 IF N_Elements(missingvalue) NE 0 THEN BEGIN IF (Size(data, /TNAME) NE 'FLOAT') $ AND (Size(data, /TNAME) NE 'DOUBLE') $ THEN contourData = Float(data) ELSE contourData = data missingIndices = Where(contourData EQ missingValue[0], missingCount) IF missingCount GT 0 THEN BEGIN contourData[missingIndices] = !Values.F_NAN IF Keyword_Set(fill) THEN BEGIN fill = 0 cell_fill = 1 ENDIF ENDIF ENDIF ELSE contourData = data ; Handle gridding of irregular data. IF irregular THEN BEGIN Triangulate, xgrid, ygrid, triangles contourData = Trigrid(xgrid, ygrid, contourData, triangles, $ NX=resolution[0], NY=resolution[1], $ XGRID=xgrid, YGRID=ygrid, MISSING=!Values.F_NAN) IF Keyword_Set(fill) THEN BEGIN fill = 0 cell_fill = 1 ENDIF ENDIF ; Do you need to calculate levels. IF N_Elements(levels) EQ 0 THEN BEGIN minData = Min(contourData, /NAN, MAX=maxData) IF Size(minData, /TYPE) EQ 2 THEN minData = Float(minData) ;Avoid 16 bit integer overflow levels = ((maxData - minData) / Float(nlevels)) * Indgen(nlevels) + minData ENDIF ; Need to make sure contour colors are integers if they are indices. IF N_Elements(c_colors) NE 0 THEN BEGIN IF Size(c_colors, /TNAME) NE 'STRING' THEN BEGIN IF (Size(c_colors, /TYPE) EQ 3) && (Max(c_colors) LE 255) THEN BEGIN con_colors = Fix(c_colors) ENDIF ELSE BEGIN IF N_Elements(palette) NE 0 THEN BEGIN TVLCT, palette IF (!D.Name NE 'NULL') THEN TVLCT, rrr, ggg, bbb, /Get rrr = Congrid(rrr, nlevels) ggg = Congrid(ggg, nlevels) bbb = Congrid(bbb, nlevels) IF (!D.Name NE 'NULL') THEN TVLCT, rrr, ggg, bbb, 1 IF N_Elements(con_colors) EQ 0 THEN con_colors = StrTrim(Indgen(nlevels)+1,2) ENDIF ELSE BEGIN con_colors = c_colors ENDELSE ENDELSE ENDIF ELSE con_colors = c_colors ENDIF ELSE BEGIN IF Keyword_Set(fill) OR Keyword_Set(cell_fill) THEN BEGIN IF N_Elements(palette) NE 0 THEN IF (!D.Name NE 'NULL') THEN TVLCT, palette IF (!D.Name NE 'NULL') THEN TVLCT, rrr, ggg, bbb, /Get rrr = Congrid(rrr, nlevels) ggg = Congrid(ggg, nlevels) bbb = Congrid(bbb, nlevels) IF (!D.Name NE 'NULL') THEN TVLCT, rrr, ggg, bbb, 1 IF N_Elements(con_colors) EQ 0 THEN con_colors = StrTrim(Indgen(nlevels)+1,2) ENDIF ELSE BEGIN con_colors = Replicate(color, nlevels) ENDELSE IF Size(con_colors, /TYPE) EQ 3 THEN IF cgGetColorState() EQ 0 THEN con_colors = Byte(con_colors) IF Size(con_colors, /TYPE) LE 2 THEN con_colors = StrTrim(Fix(c_colors),2) ENDELSE ; Set up the appropriate contour labeling. Only can do if C_LABELS not passed in. IF N_Elements(c_labels) EQ 0 THEN BEGIN indices = Indgen(N_Elements(levels)) IF label EQ 0 THEN BEGIN c_labels = Replicate(0,N_Elements(levels)) ENDIF ELSE c_labels = Reverse((indices MOD label) EQ 0) ENDIF ; Load the drawing colors. If needed create a window first, so the drawing ; colors are correct for the window you want to draw into. IF ((!D.Flags AND 256) NE 0) && (!D.Window LT 0) THEN cgDisplay IF Size(axiscolor, /TNAME) EQ 'STRING' THEN axiscolor = cgColor(axiscolor) IF Size(color, /TNAME) EQ 'STRING' THEN color = cgColor(color) IF Size(background, /TNAME) EQ 'STRING' THEN background = cgColor(background) IF (Size(con_colors, /TYPE) LE 2) && (Size(con_colors, /TYPE) NE 0) THEN con_colors = StrTrim(Fix(con_colors),2) IF Size(con_colors, /TNAME) EQ 'STRING' THEN con_colors = cgColor(con_colors) ; If you get here with no position defined, and no layout, and no !P.Multi and no nothing, ; then for God's sake, define a reasonable position in the window! IF (N_Elements(position) EQ 0) && (Total(!P.Position) EQ 0) && $ (N_Elements(layout) EQ 0) && (Total(!P.Multi) LE 0) && ~Keyword_Set(overplot) THEN BEGIN position = [0.125, 0.125, 0.925, 0.9] ENDIF ; Do you need a PostScript background color? Lot's of problems here! ; Basically, I MUST draw a plot to advance !P.MULTI. But, drawing a ; plot of any sort erases the background color. So, I have to draw a ; plot, store the new system variables, then draw my background, etc. ; I have tried LOTS of options. This is the only one that worked. IF !D.Name EQ 'PS' THEN BEGIN IF Keyword_Set(noerase) EQ 0 THEN BEGIN ; I only have to do this, if this is the first plot. IF !P.MULTI[0] EQ 0 THEN BEGIN IF Keyword_Set(overplot) NE 1 THEN BEGIN ; Save the current system variables. Will need to restore later. bangx = !X bangy = !Y bangp = !P ; Make sure axis are turned off. I don't really want to draw anything, ; just advance !P.MULTI or "erase" the display for the next plot. IF BitGet(xstyle, 2) NE 1 THEN xxstyle = xstyle + 4 ELSE xxstyle = xstyle IF BitGet(ystyle, 2) NE 1 THEN yystyle = xstyle + 4 ELSE yystyle = ystyle ; Draw the plot that doesn't draw anything. Contour, contourData, xgrid, ygrid, COLOR=axiscolor, CHARSIZE=charsize, $ BACKGROUND=background, LEVELS=levels, XSTYLE=xstyle, YSTYLE=xstyle, $ POSITION=position, _STRICT_EXTRA=extra, T3D=t3d, XTHICK=xthick, YTHICK=ythick, $ FONT=font, /NODATA, C_CHARSIZE=c_charsize, XTICKV=xtickv, XTICKS=xticks, $ YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip ; Save the "after plot" system variables. Will use later. afterx = !X aftery = !Y afterp = !P ; Draw the background color and set the variables you will need later. PS_Background, background psnodraw = 1 tempNoErase = 1 ; Restore the original system variables so that it is as if you didn't ; draw the invisible plot. !X = bangx !Y = bangy !P = bangp ENDIF ENDIF ELSE tempNoErase = noerase ENDIF ELSE tempNoErase = noerase ENDIF ELSE tempNoErase = noerase ; Storing these system variable is *required* to make !P.MULTI work correctly ; when doing filled contours. Do not delete! bangx = !X bangy = !Y bangp = !P ; If you are not overploting, draw the contour plot now. Only the axes are ; drawn here, no data. There is a special case of filling with lines instead ; of colors, which is indicated by the "normalFill" keyword being set to 0. normalFill = 1 IF Keyword_Set(overplot) EQ 0 THEN BEGIN IF N_Elements(c_orientation) NE 0 THEN BEGIN Contour, contourData, xgrid, ygrid, COLOR=axiscolor, CHARSIZE=charsize, $ BACKGROUND=background, LEVELS=levels, XSTYLE=xstyle, YSTYLE=ystyle, $ POSITION=position, _STRICT_EXTRA=extra, T3D=t3d, C_COLORS=con_colors, $ XTHICK=xthick, YTHICK=ythick, FONT=font, C_CHARSIZE=c_charsize, $ XTICKLEN=xticklen, YTICKLEN=yticklen, XTICKV=xtickv, XTICKS=xticks, $ YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip, $ TITLE=title, XTITLE=xtitle, YTITLE=ytitle, $ C_ORIENTATION=c_orientation, C_SPACING=c_spacing normalFill = 0 ENDIF ELSE BEGIN Contour, contourData, xgrid, ygrid, COLOR=axiscolor, CHARSIZE=charsize, $ BACKGROUND=background, LEVELS=levels, XSTYLE=xstyle, YSTYLE=ystyle, $ POSITION=position, _STRICT_EXTRA=extra, T3D=t3d, /NODATA, NOERASE=tempNoErase, $ XTHICK=xthick, YTHICK=ythick, FONT=font, C_CHARSIZE=c_charsize, $ XTICKLEN=xticklen, YTICKLEN=yticklen, XTICKV=xtickv, XTICKS=xticks, $ YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip, $ TITLE=title, XTITLE=xtitle, YTITLE=ytitle ENDELSE ENDIF ; This is where we actually draw the data. Check to see if we have a map object and need to ; convert the X and Y grid parameters from longitude/latitude to projected meter space ; before we do the drawing. IF (Keyword_Set(overplot) && (N_Elements(map_object) NE 0)) THEN BEGIN ; Do we have a valid map object? IF ~Obj_Isa(map_object, 'cgMap') THEN Message, 'The map object is not valid or not the correct type.' ; Are the X and Y grids the same size? If so, it makes things easy. IF (N_Elements(xgrid) EQ N_Elements(ygrid)) THEN BEGIN dims = Size(xgrid, /DIMENSIONS) n_dims = Size(xgrid, /N_DIMENSIONS) IF n_dims EQ 2 THEN BEGIN xgrid = Reform(xgrid, dims[0]*dims[1]) ygrid = Reform(ygrid, dims[0]*dims[1]) ENDIF xy = map_object -> Forward(xgrid, ygrid) xgrid = xy[0,*] ygrid = xy[1,*] IF n_dims EQ 2 THEN BEGIN xgrid = Reform(xgrid, dims[0], dims[1]) ygrid = Reform(ygrid, dims[0], dims[1]) ENDIF ENDIF ELSE BEGIN xsize = N_Elements(xgrid) ysize = N_Elements(ygrid) xgrid = Reform(Rebin(xgrid, xsize, ysize), xsize*ysize) ygrid = Reform(Rebin(Reform(ygrid, 1, ysize), xsize, ysize), xsize*ysize) xy = map_object -> Forward(xgrid, ygrid) xgrid = Reform(xy[0,*], xsize, ysize) ygrid = Reform(xy[1,*], xsize, ysize) ENDELSE ENDIF ; The actual levels are returned in the OLEVELS keyword. olevels = levels ; Draw the data on the axes. IF normalFill THEN BEGIN Contour, contourData, xgrid, ygrid, FILL=fill, CELL_FILL=cell_fill, COLOR=color, $ LEVELS=levels, C_Labels=c_labels, C_COLORS=con_colors, XTHICK=xthick, YTHICK=ythick, $ POSITION=position, XSTYLE=xstyle, YSTYLE=ystyle, _STRICT_EXTRA=extra, T3D=t3d, CHARSIZE=charsize, $ FONT=font, /OVERPLOT, C_CHARSIZE=c_charsize, XTICKLEN=xticklen, YTICKLEN=yticklen, $ XTICKV=xtickv, XTICKS=xticks, YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip, $ C_ANNOTATION=c_annotation, C_ORIENTATION=c_orientation, C_SPACING=c_spacing, $ NOERASE=(N_Elements(c_orientation) NE 0) ? 1 : 0 ENDIF ; If this is a filled contour plot, and the OUTLINE keyword is set, then draw the contour ; outlines over the top of the data. IF (fill || cell_fill) && outline THEN BEGIN Contour, contourData, xgrid, ygrid, COLOR=cgColor(outcolor), $ LEVELS=levels, C_Labels=c_labels, XTHICK=xthick, YTHICK=ythick, $ _STRICT_EXTRA=extra, T3D=t3d, CHARSIZE=charsize, C_ORIENTATION=c_orientation, $ FONT=font, /OVERPLOT, C_CHARSIZE=c_charsize, XTICKLEN=xticklen, YTICKLEN=yticklen, $ XTICKV=xtickv, XTICKS=xticks, YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip ENDIF ; If this is the first plot in PS, then we have to make it appear that we have ; drawn a plot, even though we haven't. IF N_Elements(psnodraw) EQ 1 THEN BEGIN !X = afterX !Y = afterY !P = afterP ENDIF ; If we filled the contour plot, we need to repair the axes. But, in multiple plot we ; have already advanced to the next position. We need to restore the position, do our ; repair work, and then advance to the next position again. IF (~Keyword_Set(overplot)) && (Keyword_Set(fill) || Keyword_Set(cell_fill)) THEN BEGIN IF Total(!P.Multi) NE 0 THEN BEGIN fillx = !X filly = !Y fillp = !P !X = bangx !Y = bangy !P = bangP ENDIF Contour, contourData, xgrid, ygrid, COLOR=axiscolor, CHARSIZE=charsize, $ BACKGROUND=background, LEVELS=levels, XSTYLE=xstyle, YSTYLE=ystyle, $ POSITION=position, _STRICT_EXTRA=extra, T3D=t3d, /NODATA, C_ORIENTATION=c_orientation, $ XTHICK=xthick, YTHICK=ythick, FONT=font, C_CHARSIZE=c_charsize, $ XTICKLEN=xticklen, YTICKLEN=yticklen, XTICKV=xtickv, XTICKS=xticks, $ YTICKV=ytickv, YTICKS=yticks, ZVALUE=zvalue, NOCLIP=noclip, /NOERASE IF Total(!P.Multi) NE 0 THEN BEGIN !X = fillx !Y = filly !P = fillp ENDIF ENDIF ; Restore the decomposed color state if you can. cgSetColorState, currentState ; Restore the color table. Can't do this for the Z-buffer or ; the snap shot will be incorrect. IF (!D.Name NE 'Z') AND (!D.Name NE 'NULL') THEN BEGIN TVLCT, rr, gg, bb ; If you loaded a color palette, restore the before color vectors. IF N_Elements(p_red) NE 0 THEN TVLCT, p_red, p_grn, p_blu ENDIF ; Clean up if you are using a layout. IF N_Elements(layout) NE 0 THEN !P.Multi = thisMulti ; Are we producing output? If so, we need to clean up here. IF (N_Elements(output) NE 0) && (output NE "") THEN BEGIN ; Get the output default values. cgWindow_GetDefs, $ IM_Density = im_density, $ ; Sets the density parameter on ImageMagick convert command. IM_Options = im_options, $ ; Sets extra ImageMagick options on the ImageMagick convert command. IM_Resize = im_resize, $ ; Sets the resize parameter on ImageMagick convert command. IM_Transparent = im_transparent, $ ; Sets the "alpha" keyword on ImageMagick convert command. IM_Width = im_width, $ ; Sets the width of raster file output created with ImageMagick. PDF_Unix_Convert_Cmd = pdf_unix_convert_cmd, $ ; Command to convert PS to PDF. PDF_Path = pdf_path ; The path to the Ghostscript conversion command. ; Close the PostScript file and create whatever output is needed. cgPS_Close, DELETE_PS=delete_ps, $ ALLOW_TRANSPARENT=im_transparent, $ BMP=bmp_flag, $ DENSITY=im_density, $ GIF=gif_flag, $ GS_PATH=pdf_path, $ IM_OPTIONS=im_options, $ JPEG=jpeg_flag, $ PDF=pdf_flag, $ PNG=png_flag, $ RESIZE=im_resize, $ TIFF=tiff_flag, $ UNIX_CONVERT_CMD=pdf_unix_convert_cmd, $ WIDTH=im_width basename = File_Basename(outfilename) dirname = File_Dirname(outfilename) IF dirname EQ "." THEN CD, CURRENT=dirname Print, 'Output File: ' + Filepath(ROOT_DIR=dirname, basename) ENDIF END