diff --git a/Instrument/CDPP-AMDA/MMS1/FPI.xml b/Instrument/CDPP-AMDA/MMS1/FPI.xml
index f2e84db..951b104 100644
--- a/Instrument/CDPP-AMDA/MMS1/FPI.xml
+++ b/Instrument/CDPP-AMDA/MMS1/FPI.xml
@@ -7,7 +7,7 @@
<ResourceName>FPI</ResourceName>
<AlternateName>Fast Plasma Investigation</AlternateName>
<ReleaseDate>2017-02-04T15:37:46Z</ReleaseDate>
- <Description> </Description>
+ <Description>The Fast Plasma Investigation (FPI) includes four dual electron spectrometers (DES) and four dual ion spectrometers (DIS) per spacecraft. When the data from the two sets of four dual-spectrometers are combined, FPI is able to provide the velocity-space distribution of electrons from 10 eV to 30 keV and ions from 10 eV to 30 keV with a time resolution of 30 ms, and 150 ms, respectively.</Description>
<Contact>
<PersonID>spase://CNES/Person/James.L.Burch</PersonID>
<Role>PrincipalInvestigator</Role>
@@ -20,5 +20,17 @@
<InstrumentType>ElectrostaticAnalyser</InstrumentType>
<InvestigationName/>
<ObservatoryID>spase://CNES/Observatory/CDPP-AMDA/MMS1</ObservatoryID>
+ <Caveats>On 7 June 2018 12:43 UTC, the MMS Fast Plasma Investigation (FPI) suffered its first impactful flight anomaly since launching in March, 2015. The electron spectrometer pair at quadrant 1 on MMS4 experienced a failure that appears non-recoverable. The symptoms – repeatable after further contact, reset, and commanding of the instrument – were a sustained high current draw and the absence of counts from this spectrometer pair. The spectrometer pair has been turned off. On 15 July 2018 00:47 UTC, the MMS FPI suffered its second impactful flight anomaly. The electron spectrometer pair at quadrant 0 on MMS4 experienced a similar failure that appears to be non-recoverable and this unit was also turned off. These failures appear to be unrelated.
+
+One half of the contiguous solid angle space in each electron plasma distribution on the MMS4 spacecraft is impacted. To mitigate the scientific impact, level 2 MMS4 DES fast survey and burst distribution (des-dist) files reflecting post-anomaly data will contain fill data for angle space affected by the sensor outages. Lower temporal resolution MMS4 DES fast survey moments (des-moms) files for post-anomaly data will also be released. The FPI ground system team is continuing to analyze options for potential release of MMS4 DES post-anomaly burst moments.
+
+There remain a full complement of operational spectrometers on the other three MMS spacecraft. In addition, the FPI ion spectrometers and corresponding MMS4 FPI ion data is also unaffected.
+
+Further inquiries may be directed to the FPI Lead Co-I, Barbara Giles, at barbara.giles@nasa.gov.
+ </Caveats>
+ <InformationURL>
+ <Name>Pollock, C., Moore, T., Jacques, A. et al. Fast Plasma Investigation for Magnetospheric Multiscale. Space Sci Rev 199, 331–406 (2016). https://doi.org/10.1007/s11214-016-0245-4</Name>
+ <URL>https://link.springer.com/article/10.1007/s11214-016-0245-4</URL>
+ </InformationURL>
</Instrument>
</Spase>
diff --git a/Instrument/CDPP-AMDA/MMS2/FPI.xml b/Instrument/CDPP-AMDA/MMS2/FPI.xml
new file mode 100644
index 0000000..0b0f1a7
--- /dev/null
+++ b/Instrument/CDPP-AMDA/MMS2/FPI.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.spase-group.org/data/schema" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <Instrument>
+ <ResourceID>spase://CNES/Instrument/CDPP-AMDA/MMS2/FPI</ResourceID>
+ <ResourceHeader>
+ <ResourceName>FPI</ResourceName>
+ <AlternateName>Fast Plasma Investigation</AlternateName>
+ <ReleaseDate>2017-02-04T15:37:46Z</ReleaseDate>
+ <Description>The Fast Plasma Investigation (FPI) includes four dual electron spectrometers (DES) and four dual ion spectrometers (DIS) per spacecraft. When the data from the two sets of four dual-spectrometers are combined, FPI is able to provide the velocity-space distribution of electrons from 10 eV to 30 keV and ions from 10 eV to 30 keV with a time resolution of 30 ms, and 150 ms, respectively.</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ </ResourceHeader>
+ <InstrumentType>ElectrostaticAnalyser</InstrumentType>
+ <InvestigationName/>
+ <ObservatoryID>spase://CNES/Observatory/CDPP-AMDA/MMS2</ObservatoryID>
+ <Caveats>On 7 June 2018 12:43 UTC, the MMS Fast Plasma Investigation (FPI) suffered its first impactful flight anomaly since launching in March, 2015. The electron spectrometer pair at quadrant 1 on MMS4 experienced a failure that appears non-recoverable. The symptoms – repeatable after further contact, reset, and commanding of the instrument – were a sustained high current draw and the absence of counts from this spectrometer pair. The spectrometer pair has been turned off. On 15 July 2018 00:47 UTC, the MMS FPI suffered its second impactful flight anomaly. The electron spectrometer pair at quadrant 0 on MMS4 experienced a similar failure that appears to be non-recoverable and this unit was also turned off. These failures appear to be unrelated.
+
+One half of the contiguous solid angle space in each electron plasma distribution on the MMS4 spacecraft is impacted. To mitigate the scientific impact, level 2 MMS4 DES fast survey and burst distribution (des-dist) files reflecting post-anomaly data will contain fill data for angle space affected by the sensor outages. Lower temporal resolution MMS4 DES fast survey moments (des-moms) files for post-anomaly data will also be released. The FPI ground system team is continuing to analyze options for potential release of MMS4 DES post-anomaly burst moments.
+
+There remain a full complement of operational spectrometers on the other three MMS spacecraft. In addition, the FPI ion spectrometers and corresponding MMS4 FPI ion data is also unaffected.
+
+Further inquiries may be directed to the FPI Lead Co-I, Barbara Giles, at barbara.giles@nasa.gov.
+ </Caveats>
+ <InformationURL>
+ <Name>Pollock, C., Moore, T., Jacques, A. et al. Fast Plasma Investigation for Magnetospheric Multiscale. Space Sci Rev 199, 331–406 (2016). https://doi.org/10.1007/s11214-016-0245-4</Name>
+ <URL>https://link.springer.com/article/10.1007/s11214-016-0245-4</URL>
+ </InformationURL>
+ </Instrument>
+</Spase>
diff --git a/Instrument/CDPP-AMDA/MMS3/FPI.xml b/Instrument/CDPP-AMDA/MMS3/FPI.xml
new file mode 100644
index 0000000..a747028
--- /dev/null
+++ b/Instrument/CDPP-AMDA/MMS3/FPI.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.spase-group.org/data/schema" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <Instrument>
+ <ResourceID>spase://CNES/Instrument/CDPP-AMDA/MMS3/FPI</ResourceID>
+ <ResourceHeader>
+ <ResourceName>FPI</ResourceName>
+ <AlternateName>Fast Plasma Investigation</AlternateName>
+ <ReleaseDate>2017-02-04T15:37:46Z</ReleaseDate>
+ <Description>The Fast Plasma Investigation (FPI) includes four dual electron spectrometers (DES) and four dual ion spectrometers (DIS) per spacecraft. When the data from the two sets of four dual-spectrometers are combined, FPI is able to provide the velocity-space distribution of electrons from 10 eV to 30 keV and ions from 10 eV to 30 keV with a time resolution of 30 ms, and 150 ms, respectively.</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ </ResourceHeader>
+ <InstrumentType>ElectrostaticAnalyser</InstrumentType>
+ <InvestigationName/>
+ <ObservatoryID>spase://CNES/Observatory/CDPP-AMDA/MMS3</ObservatoryID>
+ <Caveats>On 7 June 2018 12:43 UTC, the MMS Fast Plasma Investigation (FPI) suffered its first impactful flight anomaly since launching in March, 2015. The electron spectrometer pair at quadrant 1 on MMS4 experienced a failure that appears non-recoverable. The symptoms – repeatable after further contact, reset, and commanding of the instrument – were a sustained high current draw and the absence of counts from this spectrometer pair. The spectrometer pair has been turned off. On 15 July 2018 00:47 UTC, the MMS FPI suffered its second impactful flight anomaly. The electron spectrometer pair at quadrant 0 on MMS4 experienced a similar failure that appears to be non-recoverable and this unit was also turned off. These failures appear to be unrelated.
+
+One half of the contiguous solid angle space in each electron plasma distribution on the MMS4 spacecraft is impacted. To mitigate the scientific impact, level 2 MMS4 DES fast survey and burst distribution (des-dist) files reflecting post-anomaly data will contain fill data for angle space affected by the sensor outages. Lower temporal resolution MMS4 DES fast survey moments (des-moms) files for post-anomaly data will also be released. The FPI ground system team is continuing to analyze options for potential release of MMS4 DES post-anomaly burst moments.
+
+There remain a full complement of operational spectrometers on the other three MMS spacecraft. In addition, the FPI ion spectrometers and corresponding MMS4 FPI ion data is also unaffected.
+
+Further inquiries may be directed to the FPI Lead Co-I, Barbara Giles, at barbara.giles@nasa.gov.
+ </Caveats>
+ <InformationURL>
+ <Name>Pollock, C., Moore, T., Jacques, A. et al. Fast Plasma Investigation for Magnetospheric Multiscale. Space Sci Rev 199, 331–406 (2016). https://doi.org/10.1007/s11214-016-0245-4</Name>
+ <URL>https://link.springer.com/article/10.1007/s11214-016-0245-4</URL>
+ </InformationURL>
+ </Instrument>
+</Spase>
diff --git a/Instrument/CDPP-AMDA/MMS4/FPI.xml b/Instrument/CDPP-AMDA/MMS4/FPI.xml
new file mode 100644
index 0000000..9c1702c
--- /dev/null
+++ b/Instrument/CDPP-AMDA/MMS4/FPI.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.spase-group.org/data/schema" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <Instrument>
+ <ResourceID>spase://CNES/Instrument/CDPP-AMDA/MMS4/FPI</ResourceID>
+ <ResourceHeader>
+ <ResourceName>FPI</ResourceName>
+ <AlternateName>Fast Plasma Investigation</AlternateName>
+ <ReleaseDate>2017-02-04T15:37:46Z</ReleaseDate>
+ <Description>The Fast Plasma Investigation (FPI) includes four dual electron spectrometers (DES) and four dual ion spectrometers (DIS) per spacecraft. When the data from the two sets of four dual-spectrometers are combined, FPI is able to provide the velocity-space distribution of electrons from 10 eV to 30 keV and ions from 10 eV to 30 keV with a time resolution of 30 ms, and 150 ms, respectively.</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ </ResourceHeader>
+ <InstrumentType>ElectrostaticAnalyser</InstrumentType>
+ <InvestigationName/>
+ <ObservatoryID>spase://CNES/Observatory/CDPP-AMDA/MMS4</ObservatoryID>
+ <Caveats>On 7 June 2018 12:43 UTC, the MMS Fast Plasma Investigation (FPI) suffered its first impactful flight anomaly since launching in March, 2015. The electron spectrometer pair at quadrant 1 on MMS4 experienced a failure that appears non-recoverable. The symptoms – repeatable after further contact, reset, and commanding of the instrument – were a sustained high current draw and the absence of counts from this spectrometer pair. The spectrometer pair has been turned off. On 15 July 2018 00:47 UTC, the MMS FPI suffered its second impactful flight anomaly. The electron spectrometer pair at quadrant 0 on MMS4 experienced a similar failure that appears to be non-recoverable and this unit was also turned off. These failures appear to be unrelated.
+
+One half of the contiguous solid angle space in each electron plasma distribution on the MMS4 spacecraft is impacted. To mitigate the scientific impact, level 2 MMS4 DES fast survey and burst distribution (des-dist) files reflecting post-anomaly data will contain fill data for angle space affected by the sensor outages. Lower temporal resolution MMS4 DES fast survey moments (des-moms) files for post-anomaly data will also be released. The FPI ground system team is continuing to analyze options for potential release of MMS4 DES post-anomaly burst moments.
+
+There remain a full complement of operational spectrometers on the other three MMS spacecraft. In addition, the FPI ion spectrometers and corresponding MMS4 FPI ion data is also unaffected.
+
+Further inquiries may be directed to the FPI Lead Co-I, Barbara Giles, at barbara.giles@nasa.gov.
+ </Caveats>
+ <InformationURL>
+ <Name>Pollock, C., Moore, T., Jacques, A. et al. Fast Plasma Investigation for Magnetospheric Multiscale. Space Sci Rev 199, 331–406 (2016). https://doi.org/10.1007/s11214-016-0245-4</Name>
+ <URL>https://link.springer.com/article/10.1007/s11214-016-0245-4</URL>
+ </InformationURL>
+ </Instrument>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.desm.xml b/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.desm.xml
new file mode 100644
index 0000000..9b78abd
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.desm.xml
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.desm</ResourceID>
+ <ResourceHeader>
+ <ResourceName>des-moms : electrons</ResourceName>
+ <AlternateName>electron moments : burst</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (lower than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (0.05 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms1-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS1/FPI</InstrumentID>
+ <MeasurementType>ThermalPlasma</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.03S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms1_brst_desm_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms1_brst_desm_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms1_brst_desm_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms1_brst_desm_v</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desm_v(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desm_v(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desm_v(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms1_brst_desm_verr</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desm_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desm_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desm_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms1_brst_desm_tpar</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms1_brst_desm_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms1_brst_desm_hq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desm_hq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desm_hq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desm_hq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse : err</Name>
+ <ParameterKey>mms1_brst_desm_hqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desm_hqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desm_hqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desm_hqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms1_brst_desmpres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desmpres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desmpres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desmpres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms1_brst_desmpres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms1_brst_desmpres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms1_brst_desmpres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms1_brst_desmpres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms1_brst_desmpres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms1_brst_desmpres(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms1_brst_desmpreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desmpreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desmpreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desmpreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms1_brst_desmpreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms1_brst_desmpreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms1_brst_desmpreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms1_brst_desmpreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms1_brst_desmpreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms1_brst_desmpreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>temp_tensor_gse</Name>
+ <ParameterKey>mms1_brst_desm_t</ParameterKey>
+ <Description></Description>
+ <Units>eV</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_desm_t(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_desm_t(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_desm_t(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms1_brst_desm_t(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms1_brst_desm_t(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms1_brst_desm_t(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms1_brst_desm_t(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms1_brst_desm_t(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms1_brst_desm_t(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>elec eflux : omni</Name>
+ <ParameterKey>mms1_brst_desm_spom</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : para</Name>
+ <ParameterKey>mms1_brst_des_para</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : anti</Name>
+ <ParameterKey>mms1_brst_des_anti</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : perp</Name>
+ <ParameterKey>mms1_brst_des_perp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : lowen</Name>
+ <ParameterKey>mms1_brst_des_palow</ParameterKey>
+ <Description>Low energy bin: energy steps 0-10 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : miden</Name>
+ <ParameterKey>mms1_brst_des_pamid</ParameterKey>
+ <Description>Mid energy bin: energy steps 11-20 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : highen</Name>
+ <ParameterKey>mms1_brst_des_pahigh</ParameterKey>
+ <Description>High energy bin: energy steps 21-31 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.dism.xml b/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.dism.xml
new file mode 100644
index 0000000..8f4250a
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.dism.xml
@@ -0,0 +1,422 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS1/FPI/mms1-fpi-brst.dism</ResourceID>
+ <ResourceHeader>
+ <ResourceName>dis-moms : ions</ResourceName>
+ <AlternateName>ion moments : burst mode</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (greater than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (n_DIS lower than 0.0 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)
+ * Bit-13 = significant (greater than 20%) penetrating radiation
+ </Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms1-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS1/FPI</InstrumentID>
+ <MeasurementType>MagneticField</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.15S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms1_brst_dis_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms1_brst_dis_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms1_brst_dis_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms1_brst_dis_vgse</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dis_vgse(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dis_vgse(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dis_vgse(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms1_brst_dis_verr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dis_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dis_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dis_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms1_brst_dis_tpara</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms1_brst_dis_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms1_brst_dis_heatq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dis_heatq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dis_heatq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dis_heatq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq : err</Name>
+ <ParameterKey>mms1_brst_dis_heatqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dis_heatqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dis_heatqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dis_heatqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms1_brst_dispres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dispres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dispres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dispres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms1_brst_dispres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms1_brst_dispres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms1_brst_dispres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms1_brst_dispres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms1_brst_dispres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms1_brst_dispres(8)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms1_brst_dispreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms1_brst_dispreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms1_brst_dispreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms1_brst_dispreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms1_brst_dispreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms1_brst_dispreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms1_brst_dispreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms1_brst_dispreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms1_brst_dispreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms1_brst_dispreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Tensor</Qualifier>
+ <ParticleQuantity>Pressure</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>ion eflux : omni</Name>
+ <ParameterKey>mms1_brst_dis_omni</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.desm.xml b/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.desm.xml
new file mode 100644
index 0000000..f13068a
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.desm.xml
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.desm</ResourceID>
+ <ResourceHeader>
+ <ResourceName>des-moms : electrons</ResourceName>
+ <AlternateName>electron moments : burst</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (lower than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (0.05 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms2-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS2/FPI</InstrumentID>
+ <MeasurementType>ThermalPlasma</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.03S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms2_brst_desm_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms2_brst_desm_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms2_brst_desm_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms2_brst_desm_v</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desm_v(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desm_v(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desm_v(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms2_brst_desm_verr</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desm_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desm_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desm_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms2_brst_desm_tpar</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms2_brst_desm_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms2_brst_desm_hq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desm_hq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desm_hq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desm_hq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse : err</Name>
+ <ParameterKey>mms2_brst_desm_hqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desm_hqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desm_hqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desm_hqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms2_brst_desmpres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desmpres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desmpres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desmpres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms2_brst_desmpres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms2_brst_desmpres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms2_brst_desmpres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms2_brst_desmpres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms2_brst_desmpres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms2_brst_desmpres(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms2_brst_desmpreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desmpreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desmpreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desmpreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms2_brst_desmpreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms2_brst_desmpreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms2_brst_desmpreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms2_brst_desmpreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms2_brst_desmpreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms2_brst_desmpreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>temp_tensor_gse</Name>
+ <ParameterKey>mms2_brst_desm_t</ParameterKey>
+ <Description></Description>
+ <Units>eV</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_desm_t(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_desm_t(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_desm_t(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms2_brst_desm_t(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms2_brst_desm_t(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms2_brst_desm_t(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms2_brst_desm_t(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms2_brst_desm_t(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms2_brst_desm_t(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>elec eflux : omni</Name>
+ <ParameterKey>mms2_brst_desm_spom</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : para</Name>
+ <ParameterKey>mms2_brst_des_para</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : anti</Name>
+ <ParameterKey>mms2_brst_des_anti</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : perp</Name>
+ <ParameterKey>mms2_brst_des_perp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : lowen</Name>
+ <ParameterKey>mms2_brst_des_palow</ParameterKey>
+ <Description>Low energy bin: energy steps 0-10 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : miden</Name>
+ <ParameterKey>mms2_brst_des_pamid</ParameterKey>
+ <Description>Mid energy bin: energy steps 11-20 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : highen</Name>
+ <ParameterKey>mms2_brst_des_pahigh</ParameterKey>
+ <Description>High energy bin: energy steps 21-31 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.dism.xml b/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.dism.xml
new file mode 100644
index 0000000..b3950a0
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.dism.xml
@@ -0,0 +1,422 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS2/FPI/mms2-fpi-brst.dism</ResourceID>
+ <ResourceHeader>
+ <ResourceName>dis-moms : ions</ResourceName>
+ <AlternateName>ion moments : burst mode</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (greater than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (n_DIS lower than 0.0 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)
+ * Bit-13 = significant (greater than 20%) penetrating radiation
+ </Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms2-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS2/FPI</InstrumentID>
+ <MeasurementType>MagneticField</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.15S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms2_brst_dis_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms2_brst_dis_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms2_brst_dis_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms2_brst_dis_vgse</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dis_vgse(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dis_vgse(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dis_vgse(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms2_brst_dis_verr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dis_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dis_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dis_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms2_brst_dis_tpara</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms2_brst_dis_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms2_brst_dis_heatq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dis_heatq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dis_heatq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dis_heatq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq : err</Name>
+ <ParameterKey>mms2_brst_dis_heatqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dis_heatqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dis_heatqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dis_heatqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms2_brst_dispres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dispres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dispres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dispres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms2_brst_dispres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms2_brst_dispres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms2_brst_dispres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms2_brst_dispres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms2_brst_dispres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms2_brst_dispres(8)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms2_brst_dispreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms2_brst_dispreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms2_brst_dispreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms2_brst_dispreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms2_brst_dispreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms2_brst_dispreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms2_brst_dispreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms2_brst_dispreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms2_brst_dispreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms2_brst_dispreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Tensor</Qualifier>
+ <ParticleQuantity>Pressure</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>ion eflux : omni</Name>
+ <ParameterKey>mms2_brst_dis_omni</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.desm.xml b/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.desm.xml
new file mode 100644
index 0000000..945496d
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.desm.xml
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.desm</ResourceID>
+ <ResourceHeader>
+ <ResourceName>des-moms : electrons</ResourceName>
+ <AlternateName>electron moments : burst</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (lower than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (0.05 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms3-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS3/FPI</InstrumentID>
+ <MeasurementType>ThermalPlasma</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.03S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms3_brst_desm_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms3_brst_desm_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms3_brst_desm_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms3_brst_desm_v</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desm_v(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desm_v(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desm_v(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms3_brst_desm_verr</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desm_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desm_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desm_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms3_brst_desm_tpar</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms3_brst_desm_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms3_brst_desm_hq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desm_hq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desm_hq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desm_hq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse : err</Name>
+ <ParameterKey>mms3_brst_desm_hqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desm_hqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desm_hqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desm_hqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms3_brst_desmpres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desmpres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desmpres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desmpres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms3_brst_desmpres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms3_brst_desmpres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms3_brst_desmpres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms3_brst_desmpres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms3_brst_desmpres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms3_brst_desmpres(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms3_brst_desmpreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desmpreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desmpreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desmpreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms3_brst_desmpreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms3_brst_desmpreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms3_brst_desmpreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms3_brst_desmpreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms3_brst_desmpreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms3_brst_desmpreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>temp_tensor_gse</Name>
+ <ParameterKey>mms3_brst_desm_t</ParameterKey>
+ <Description></Description>
+ <Units>eV</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_desm_t(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_desm_t(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_desm_t(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms3_brst_desm_t(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms3_brst_desm_t(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms3_brst_desm_t(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms3_brst_desm_t(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms3_brst_desm_t(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms3_brst_desm_t(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>elec eflux : omni</Name>
+ <ParameterKey>mms3_brst_desm_spom</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : para</Name>
+ <ParameterKey>mms3_brst_des_para</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : anti</Name>
+ <ParameterKey>mms3_brst_des_anti</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : perp</Name>
+ <ParameterKey>mms3_brst_des_perp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : lowen</Name>
+ <ParameterKey>mms3_brst_des_palow</ParameterKey>
+ <Description>Low energy bin: energy steps 0-10 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : miden</Name>
+ <ParameterKey>mms3_brst_des_pamid</ParameterKey>
+ <Description>Mid energy bin: energy steps 11-20 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : highen</Name>
+ <ParameterKey>mms3_brst_des_pahigh</ParameterKey>
+ <Description>High energy bin: energy steps 21-31 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.dism.xml b/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.dism.xml
new file mode 100644
index 0000000..e85e686
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.dism.xml
@@ -0,0 +1,422 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS3/FPI/mms3-fpi-brst.dism</ResourceID>
+ <ResourceHeader>
+ <ResourceName>dis-moms : ions</ResourceName>
+ <AlternateName>ion moments : burst mode</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (greater than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (n_DIS lower than 0.0 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)
+ * Bit-13 = significant (greater than 20%) penetrating radiation
+ </Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms3-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS3/FPI</InstrumentID>
+ <MeasurementType>MagneticField</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.15S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms3_brst_dis_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms3_brst_dis_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms3_brst_dis_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms3_brst_dis_vgse</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dis_vgse(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dis_vgse(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dis_vgse(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms3_brst_dis_verr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dis_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dis_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dis_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms3_brst_dis_tpara</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms3_brst_dis_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms3_brst_dis_heatq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dis_heatq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dis_heatq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dis_heatq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq : err</Name>
+ <ParameterKey>mms3_brst_dis_heatqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dis_heatqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dis_heatqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dis_heatqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms3_brst_dispres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dispres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dispres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dispres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms3_brst_dispres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms3_brst_dispres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms3_brst_dispres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms3_brst_dispres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms3_brst_dispres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms3_brst_dispres(8)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms3_brst_dispreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms3_brst_dispreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms3_brst_dispreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms3_brst_dispreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms3_brst_dispreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms3_brst_dispreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms3_brst_dispreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms3_brst_dispreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms3_brst_dispreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms3_brst_dispreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Tensor</Qualifier>
+ <ParticleQuantity>Pressure</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>ion eflux : omni</Name>
+ <ParameterKey>mms3_brst_dis_omni</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.desm.xml b/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.desm.xml
new file mode 100644
index 0000000..aa72231
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.desm.xml
@@ -0,0 +1,572 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.desm</ResourceID>
+ <ResourceHeader>
+ <ResourceName>des-moms : electrons</ResourceName>
+ <AlternateName>electron moments : burst</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (lower than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (0.05 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)</Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms4-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS4/FPI</InstrumentID>
+ <MeasurementType>ThermalPlasma</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.03S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms4_brst_desm_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms4_brst_desm_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms4_brst_desm_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms4_brst_desm_v</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desm_v(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desm_v(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desm_v(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms4_brst_desm_verr</ParameterKey>
+ <Description/>
+ <FillValue>-1e+31</FillValue>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desm_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desm_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desm_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms4_brst_desm_tpar</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms4_brst_desm_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms4_brst_desm_hq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desm_hq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desm_hq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desm_hq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse : err</Name>
+ <ParameterKey>mms4_brst_desm_hqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desm_hqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desm_hqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desm_hqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms4_brst_desmpres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desmpres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desmpres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desmpres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms4_brst_desmpres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms4_brst_desmpres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms4_brst_desmpres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms4_brst_desmpres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms4_brst_desmpres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms4_brst_desmpres(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms4_brst_desmpreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desmpreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desmpreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desmpreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms4_brst_desmpreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms4_brst_desmpreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms4_brst_desmpreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms4_brst_desmpreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms4_brst_desmpreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms4_brst_desmpreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>temp_tensor_gse</Name>
+ <ParameterKey>mms4_brst_desm_t</ParameterKey>
+ <Description></Description>
+ <Units>eV</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_desm_t(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_desm_t(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_desm_t(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms4_brst_desm_t(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms4_brst_desm_t(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms4_brst_desm_t(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms4_brst_desm_t(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms4_brst_desm_t(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms4_brst_desm_t(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>elec eflux : omni</Name>
+ <ParameterKey>mms4_brst_desm_spom</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : para</Name>
+ <ParameterKey>mms4_brst_des_para</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : anti</Name>
+ <ParameterKey>mms4_brst_des_anti</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>elec eflux : perp</Name>
+ <ParameterKey>mms4_brst_des_perp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : lowen</Name>
+ <ParameterKey>mms4_brst_des_palow</ParameterKey>
+ <Description>Low energy bin: energy steps 0-10 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : miden</Name>
+ <ParameterKey>mms4_brst_des_pamid</ParameterKey>
+ <Description>Mid energy bin: energy steps 11-20 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>pa dist : highen</Name>
+ <ParameterKey>mms4_brst_des_pahigh</ParameterKey>
+ <Description>High energy bin: energy steps 21-31 (of total steps 0-31).
+ Pitch-angle bin size: 6 deg. Note that pitch angles are calculated in the spacecraft frame;
+ i.e., not shifted by the bulk velocity</Description>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.dism.xml b/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.dism.xml
new file mode 100644
index 0000000..f5be5d1
--- /dev/null
+++ b/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.dism.xml
@@ -0,0 +1,422 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.spase-group.org/data/schema http://amda.irap.omp.eu/public/schemas/spase-2_3_1.xsd">
+ <Version>2.3.1</Version>
+ <NumericalData>
+ <ResourceID>spase://CNES/NumericalData/CDPP-AMDA/MMS/MMS4/FPI/mms4-fpi-brst.dism</ResourceID>
+ <ResourceHeader>
+ <ResourceName>dis-moms : ions</ResourceName>
+ <AlternateName>ion moments : burst mode</AlternateName>
+ <ReleaseDate>2017-01-16T11:50:00</ReleaseDate>
+ <Description>FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for
+the current Mission Phase. Data are taken at burst (30/150 ms for DES/DIS) resolution in this mode. Data are also made
+ available at survey (4.5 s) resolution. Per mission design, not all burst-resolution data are downlinked, but all sur vey data are downlinked. Planning around calibration activities, avoidance of Earth radiation belts, etc, when possible
+, FPI usually operates in Slow Survey (SS) Mode (60 s resolution) outside of ROI. This moments product contains results
+ from integrating the standard moments of phase-space distributions formed from the indicated data type (DES/DIS burst,
+ FS or SS). For convenience, some additional parameters are included to augment those most commonly found in a moments
+product of this sort, plus time-stamps and other annotation characterizing the state of the instrument system at the in
+dicated time.
+
+ Error Flags : Value of zero signifies no quality errors.
+ For non-zero values:
+ * Bit-0 = manually flagged interval
+ * Bit-1 = overcounting/saturation effects likely present in skymap
+ * Bit-2 = reported spacecraft potential above 20V
+ * Bit-3 = invalid/unavailable spacecraft potential
+ * Bit-4 = significant (greater than 10%) cold plasma (greater than 10eV) component
+ * Bit-5 = significant (greater than 25%) hot plasma (greater than 30keV) component
+ * Bit-6 = high sonic Mach number (v/vth greater than 2.5)
+ * Bit-7 = low calculated density (n_DIS lower than 0.0 cm^-3)
+ * Bit-8 = bentPipe magnetic field used instead of brst l2pre magnetic field
+ * Bit-9 = srvy l2pre magnetic field used instead of brst l2pre magnetic field
+ * Bit-10 = no internally generated photoelectron correction applied
+ * Bit-11 = compression pipeline error
+ * Bit-12 = spintone calculation error (DBCS only)
+ * Bit-13 = significant (greater than 20%) penetrating radiation
+ </Description>
+ <Contact>
+ <PersonID>spase://CNES/Person/James.L.Burch</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <Contact>
+ <PersonID>spase://CNES/Person/B.Giles</PersonID>
+ <Role>PrincipalInvestigator</Role>
+ </Contact>
+ <InformationURL>
+ <Name>MMS home page at GSFC</Name>
+ <URL>http://mms.gsfc.nasa.gov</URL>
+ </InformationURL>
+ <InformationURL>
+ <Name>FPI overview</Name>
+ <URL>http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html#fpi</URL>
+ </InformationURL>
+ <Association>
+ <AssociationID>mms4-fpi-brst</AssociationID>
+ <AssociationType>PartOf</AssociationType>
+ <Note>burst</Note>
+ </Association>
+ </ResourceHeader>
+ <AccessInformation>
+ <RepositoryID>spase://SMWG/Repository/CNES/CDPP-AMDA</RepositoryID>
+ <Availability>Online</Availability>
+ <AccessRights>Open</AccessRights>
+ <AccessURL>
+ <Name>AMDA at CDPP</Name>
+ <URL>amda.cdpp.eu</URL>
+ </AccessURL>
+ <Format>NetCDF</Format>
+ </AccessInformation>
+ <ProviderName>LASP</ProviderName>
+ <InstrumentID>spase://CNES/Instrument/CDPP-AMDA/MMS4/FPI</InstrumentID>
+ <MeasurementType>MagneticField</MeasurementType>
+ <TemporalDescription>
+ <TimeSpan>
+ <StartDate>2000-08-22T00:00:00Z</StartDate>
+ <StopDate>2019-01-14T15:58:00Z</StopDate>
+ </TimeSpan>
+ <Cadence>PT0.15S</Cadence>
+ </TemporalDescription>
+ <Parameter>
+ <Name>error flags</Name>
+ <ParameterKey>mms4_brst_dis_err</ParameterKey>
+ <Description></Description>
+ <Ucd/>
+ <Units></Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density</Name>
+ <ParameterKey>mms4_brst_dis_n</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>density : err</Name>
+ <ParameterKey>mms4_brst_dis_nerr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>cm^-3</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse</Name>
+ <ParameterKey>mms4_brst_dis_vgse</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dis_vgse(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dis_vgse(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dis_vgse(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>v_gse : err</Name>
+ <ParameterKey>mms4_brst_dis_verr</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>km/s</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>vx</Name>
+ <Qualifier>Component.I</Qualifier>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dis_verr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vy</Name>
+ <Qualifier>Component.J</Qualifier>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dis_verr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>vz</Name>
+ <Qualifier>Component.K</Qualifier>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dis_verr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+ <Parameter>
+ <Name>t_para</Name>
+ <ParameterKey>mms4_brst_dis_tpara</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>t_perp</Name>
+ <ParameterKey>mms4_brst_dis_tperp</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>eV</Units>
+ <UnitsConversion/>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ </Parameter>
+ <Parameter>
+ <Name>heatq_gse</Name>
+ <ParameterKey>mms4_brst_dis_heatq</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dis_heatq(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dis_heatq(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dis_heatq(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>heatq : err</Name>
+ <ParameterKey>mms4_brst_dis_heatqerr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>3</Size>
+ <Element>
+ <Name>x</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dis_heatqerr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>y</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dis_heatqerr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>z</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dis_heatqerr(2)</ParameterKey>
+ </Element>
+ </Structure>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <Qualifier>Vector</Qualifier>
+ <ParticleQuantity>HeatFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse</Name>
+ <ParameterKey>mms4_brst_dispres</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dispres(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dispres(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dispres(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms4_brst_dispres(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms4_brst_dispres(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms4_brst_dispres(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms4_brst_dispres(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms4_brst_dispres(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms4_brst_dispres(8)</ParameterKey>
+ </Element>
+ </Structure>
+ </Parameter>
+
+ <Parameter>
+ <Name>press_tensor_gse : err</Name>
+ <ParameterKey>mms4_brst_dispreserr</ParameterKey>
+ <Description></Description>
+ <Ucd>phys.pressure</Ucd>
+ <Units>nPa</Units>
+ <CoordinateSystem>
+ <CoordinateRepresentation>Cartesian</CoordinateRepresentation>
+ <CoordinateSystemName>GSE</CoordinateSystemName>
+ </CoordinateSystem>
+ <RenderingHints>
+ <DisplayType>TimeSeries</DisplayType>
+ </RenderingHints>
+ <Structure>
+ <Size>9</Size>
+ <Element>
+ <Name>xx</Name>
+ <Index>1</Index>
+ <ParameterKey>mms4_brst_dispreserr(0)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xy</Name>
+ <Index>2</Index>
+ <ParameterKey>mms4_brst_dispreserr(1)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>xz</Name>
+ <Index>3</Index>
+ <ParameterKey>mms4_brst_dispreserr(2)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yx</Name>
+ <Index>4</Index>
+ <ParameterKey>mms4_brst_dispreserr(3)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yy</Name>
+ <Index>5</Index>
+ <ParameterKey>mms4_brst_dispreserr(4)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>yz</Name>
+ <Index>6</Index>
+ <ParameterKey>mms4_brst_dispreserr(5)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zx</Name>
+ <Index>7</Index>
+ <ParameterKey>mms4_brst_dispreserr(6)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zy</Name>
+ <Index>8</Index>
+ <ParameterKey>mms4_brst_dispreserr(7)</ParameterKey>
+ </Element>
+ <Element>
+ <Name>zz</Name>
+ <Index>9</Index>
+ <ParameterKey>mms4_brst_dispreserr(8)</ParameterKey>
+ </Element>
+
+ </Structure>
+ <Particle>
+ <ParticleType>Electron</ParticleType>
+ <Qualifier>Tensor</Qualifier>
+ <ParticleQuantity>Pressure</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ <Parameter>
+ <Name>ion eflux : omni</Name>
+ <ParameterKey>mms4_brst_dis_omni</ParameterKey>
+ <Description/>
+ <Ucd/>
+ <Units>keV/(cm^2-s-sr-keV)</Units>
+ <RenderingHints>
+ <DisplayType>Spectrogram</DisplayType>
+ </RenderingHints>
+ <Particle>
+ <ParticleType>Ion</ParticleType>
+ <ParticleQuantity>EnergyFlux</ParticleQuantity>
+ </Particle>
+ </Parameter>
+ </NumericalData>
+</Spase>
diff --git a/Person/M.G.Henderson.xml b/Person/M.G.Henderson.xml
index aa2bff6..1d1d8a4 100644
--- a/Person/M.G.Henderson.xml
+++ b/Person/M.G.Henderson.xml
@@ -3,8 +3,8 @@
<Version>2.2.0</Version>
<Person>
<ResourceID>spase://CNES/Person/M.G.Henderson</ResourceID>
- <PersonName>Dr. M.G.Henderson</PersonName>
+ <PersonName>Dr. M.G. Henderson</PersonName>
<OrganizationName>Los Alamos National Laboratory</OrganizationName>
- <Email/>
+ <Email>mghenderson@lanl.gov</Email>
</Person>
</Spase>
diff --git a/Person/S.K.Morley.xml b/Person/S.K.Morley.xml
index 0e0395b..3599645 100644
--- a/Person/S.K.Morley.xml
+++ b/Person/S.K.Morley.xml
@@ -3,8 +3,8 @@
<Version>2.2.0</Version>
<Person>
<ResourceID>spase://CNES/Person/S.K.Morley</ResourceID>
- <PersonName>Dr. S.K.Morley</PersonName>
+ <PersonName>Dr. S.K. Morley</PersonName>
<OrganizationName>Los Alamos National Laboratory</OrganizationName>
- <Email/>
+ <Email>smorley@lanl.gov</Email>
</Person>
</Spase>
--
libgit2 0.21.2